Abstract:High-capacity silicon (Si) anodes in lithium-ion batteries require functional binders to accommodate the dramatic volume change and to improve the long-term stability during the charge/discharge cycles. Herein, a physically cross-linked hydrogen-bonded polymeric complex is reported and employed as an efficient binder for high-performance Si anodes. Composed of a blend of two commercially available polymers, poly(acrylic acid) (PAA) and poly(ethylene oxide) (PEO), the proposed PAA–PEO binders are synthesized via the solution mixing process. It is revealed that PEO brings in better elasticity and ionic conductivity, but at the expense of lower adhesion properties. With an optimized composition, the PAA–PEO binders show better cycling performance for Si anodes than the pure PAA binder. This study would provide insights for the design of low-cost and efficient binder for electrode materials with huge volume changes.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01849.The characterization of as-received Si particles (Figure S1); rheology analysis of the PAA–PEO composites (Figure S2); two force–distance curves measured by an AFM Si probe (Figure S3); cycling performance of the Si electrode with PAA–PEO15 binder (Figure S4); charge–discharge curves from the first to 100th cycle of varous electrodes (Figure S5); equivalent circuit for stimulation (Figure S6); cyclic voltammetry profile of Si electrodes with different binders (Figure S7); SEM images of Si electrodes with different binders at high magnification (Figure S8) (PDF)This article has not yet been cited by other publications.

Re‐Engineering Poly(Acrylic Acid) Binder toward Optimized Electrochemical Performance for Silicon Lithium‐Ion Batteries: Branching Architecture Leads to Balanced Properties of Polymeric Binders

Epoxy and Amide Crosslinked Polarity Enhanced Polysaccharides Binder for Silicon Anode in Lithium-Ion Batteries

Poly(Acrylic Acid)‐Based Polymer Binders for High‐Performance Lithium‐Ion Batteries: From Structure to Properties

Epoxy Cross-Linking Enhanced the Toughness of Polysaccharides As a Silicon Anode Binder for Lithium-Ion Batteries.

A highly crosslinked polymeric binder for silicon anode in lithium-ion batteries

A Robust Network Binder Via Localized Linking by Small Molecules for High-Areal-capacity Silicon Anodes in Lithium-Ion Batteries

Precisely Prelithiated Polyacrylic Acid Binder Improving Electrochemical Performance of Micron‐Sized Silicon Anodes for Lithium‐Ion Batteries

Radical-Scavenging Activatable and Robust Polymeric Binder Based on Poly(acrylic acid) Cross-Linked with Tannic Acid for Silicon Anode of Lithium Storage System

A Highly Efficient Silicone-Modified Polyamide Acid Binder for Silicon-Based Anode in Lithium-Ion Batteries

Polyacrylic acid and β-cyclodextrin polymer cross-linking binders to enhance capacity performance of silicon/carbon composite electrodes in lithium-ion batteries

A Physically Cross-Linked Hydrogen-Bonded Polymeric Composite Binder for High-Performance Silicon Anodes

Understanding Polyacrylic Acid and Lithium Polyacrylate Binder Behavior in Silicon Based Electrodes for Li-Ion Batteries

Poly (acrylic Acid Sodium) Grafted Carboxymethyl Cellulose As a High Performance Polymer Binder for Silicon Anode in Lithium Ion Batteries

An Elastic Cross-Linked Binder for Silicon Anodes in Lithium-Ion Batteries with a High Mass Loading

In-situ regulation of solid electrolyte interface formation by molecular designing of polymer binders for high-performance silicon/graphite anode

Gradient H-Bonding Supports Highly Adaptable and Rapidly Self-Healing Composite Binders with High Ionic Conductivity for Silicon Anodes in Lithium-Ion Batteries

Polydopamine blended with polyacrylic acid for silicon anode binder with high electrochemical performance

A Highly Stretchable and Self‐Healing Composite Binder Based on the Hydrogen‐Bond Network for Silicon Anodes in High‐Energy‐Density Lithium‐Ion Batteries

Glycinamide modified polyacrylic acid as high-performance binder for silicon anodes in lithium-ion batteries

A Flexible and Conductive Binder with Strong Adhesion for High Performance Silicon‐Based Lithium‐Ion Battery Anode

Remarkably Improved Cycling Stability of Commercial Micron-Sized Silicon Enabled by a Novel Organic/inorganic Hybrid Binder