Abstract:Silicon has been extensively studied as an anode material in lithium-ion batteries due to its extremely high theoretical specific capacity of 3578 mAh/g (assuming Li 15 Si 4 as intermediate product). However, silicon undergoes huge volume variations during repeated discharge and charge, leading to poor electrode mechanical integrity, continual electrolyte decomposition and fast capacity decay. Developing high strength binders in silicon anodes have been considered as an efficient pathway to alleviate various capacity decay pathways. Currently, lithiated poly acrylic acid (LiPAA) is mostly used as the binder for silicon electrodes due to its strong binding capability and (electro)chemical compatibility with Si and electrolyte. However, cracks at the electrode level can still be observed for the cycled electrodes, which suggests that a stronger binder is required to mitigate volume expansion of Si electrode and hold the particles together. Herein we study the polyimide (PI) materials as the binders for Si anode in an attempt to achieve stable cycling performance. With PI binder, the silicon electrode exhibits a higher tensile strength than that of conventional PAA binder. The strong adhesion of the PI binder suppresses the structural collapse of the Si negative electrode during lithiation/delithiation, enabling high capacity retention and stable cycle life. However, the PI crosslinking process requires high temperature and inert atmosphere, which is a challenge for its practical application. In this work, we explore various PI crosslinking conditions and their effects on electrochemical performance. This work offers us an alternative binder material with high tensile strength for the Si electrode. Acknowledgement We gratefully acknowledge the support from the U.S. Department of Energy's Vehicle Technologies Office. This work is conducted under the Cell Analysis, Modeling, and Prototyping (CAMP) Facility at Argonne National Laboratory. Argonne National Laboratory is operated for DOE office of Science by UChicago Argonne, LLC, under contract number DE-AC02-06CH11357.

Precisely Prelithiated Polyacrylic Acid Binder Improving Electrochemical Performance of Micron‐Sized Silicon Anodes for Lithium‐Ion Batteries

Re‐Engineering Poly(Acrylic Acid) Binder toward Optimized Electrochemical Performance for Silicon Lithium‐Ion Batteries: Branching Architecture Leads to Balanced Properties of Polymeric Binders

Engineering Prelithiation of Polyacrylic Acid Binder: A Universal Strategy to Boost Initial Coulombic Efficiency for High‐Areal‐Capacity Si‐Based Anodes

Advanced Inorganic Lithium Metasilicate Binder for High-Performance Silicon Anode.

Lithium Substituted Poly(acrylic acid) as a Mechanically Robust Binder for Low-Cost Silicon Microparticle Electrodes

Partially Carbonized Polymer Binder with Polymer Dots for Silicon Anodes in Lithium-Ion Batteries.

A Highly Efficient Silicone-Modified Polyamide Acid Binder for Silicon-Based Anode in Lithium-Ion Batteries

Polydopamine blended with polyacrylic acid for silicon anode binder with high electrochemical performance

Li0.5PAA domains filled in porous sodium alginate skeleton: A 3D bicontinuous composite network binder to stabilize micro-silicon anode for high-performance lithium ion battery

Poly(Acrylic Acid)‐Based Polymer Binders for High‐Performance Lithium‐Ion Batteries: From Structure to Properties

Understanding Polyacrylic Acid and Lithium Polyacrylate Binder Behavior in Silicon Based Electrodes for Li-Ion Batteries

An Elastic Cross-Linked Binder for Silicon Anodes in Lithium-Ion Batteries with a High Mass Loading

Evaluating Polyacrylic Acid as a Universal Aqueous Binder for Ni‐rich Cathodes NMC811 and Si Anodes in Full cell Lithium‐ion Batteries

High Adhesive Polyimide Binder for Silicon Anodes of Lithium Ion Batteries

Mechanically Robust Polyimide Binder Realizes Stable and High Electrochemical Performance for Micro‐Silicon Anodes in Lithium‐Ion Batteries

Glycinamide modified polyacrylic acid as high-performance binder for silicon anodes in lithium-ion batteries

Prelithiated rigid polymer with high ionic conductivity as silicon-based anode binder for lithium-ion battery

Improved performance in micron-sized silicon anodes by in situ polymerization of acrylic acid-based slurry

An in situ thermal cross-linking binder for silicon-based lithium ion battery

A bioinspired high-modulus mineral hydrogel binder for improving the cycling stability of microsized silicon particle-based lithium-ion battery

A highly crosslinked polymeric binder for silicon anode in lithium-ion batteries