Abstract:LiMn 2 O 4 is considered to be a promising cathode material for lithium-ion batteries due to its decent energy density, low price and environmental benignity. However, the problems of Mn dissolution, migration and deposition during the cycle, seriously affect its lifespan, especially at high temperature. In this study, we developed a strategy by which we killed two birds with one stone. A low molecular weight polyacrylic acid (PAA) mixed with sodium carboxymethyl cellulose (CMC) is applied as binder and coating agent for cathode particles at the same time. The conventional and environmental unfriendly polyvinylidene difluoride (PVDF)-N-methylpyrrolidone (NMP) system is replaced by the cheap and green aqueous binder with improved adhesive effect. Furthermore, the binder-based surface coating layer not only alleviates the side reaction between the electrolyte and the cathode particles, but also chelates the dissolved Mn 2+ by the large amount of carboxyl groups in PAA molecules and so prevents the following migration and deposition of Mn 2+ . In the button half-cell with low molecular weight PAA based binder, the capacity retention reaches 94.1 % after 1000 cycles at room temperature and 92.0 % after 200 cycles at 60 degrees centigrade. Meanwhile, 18650-type cylindrical cells were prepared with this binder, which shows a great high temperature storage performance. After the cell was held at 60 degrees centigrade for 25 days at full charged state, the internal resistance increased by only 1.25mΩ, the voltage decreased by only 0.1 V, the residual capacity retention and recovery capacity retention reaches 85.6 % and 92.2 %. This work shows the great potential of the aqueous binder in dealing with the problem of Mn dissolution during the cycling of manganese-based cathode materials for lithium-ion batteries.

Lithium poly-acrylic acid as a fast Li+ transport media and a highly stable aqueous binder for Li3V2(PO4)3 cathode electrodes

Lithium poly-acrylic acid as a fast Li<sup>+</sup> transport media and a highly stable aqueous binder for Li<sub>3</sub>V<sub>2</sub>(PO<sub>4</sub>)<sub>3</sub> cathode electrodes

An Aqueous Binder for High-Areal-Capacity Fe3O4-Based Anodes in Lithium-Ion Batteries

Effect of poly (acrylic acid)/Poly (vinyl alcohol) blending binder on electrochemical performance for lithium iron phosphate cathodes

Stabilizing Zn2SiO4 Anode by a Lithium Polyacrylate Binder for Highly Reversible Lithium-Ion Storage.

Constructing Crosslinked Lithium Polyacrylate/polyvinyl Alcohol Complex Binder for High Performance Sulfur Cathode in Lithium-Sulfur Batteries

Bifunctional low molecular weight polyacrylic acid as aqueous binder and coating agent enables high performance LiMn 2 O 4 cathode for lithium-ion batteries

Poly(amidoamine) dendrimer-induced 3D crosslinked network binder for LiFePO4 cathode: endowing battery with superior cycling stability

Cost-Effective Water-Soluble Poly(vinyl Alcohol) As a Functional Binder for High-Sulfur-Loading Cathodes in Lithium–Sulfur Batteries

Multifunctional water-soluble binders for Li-S batteries

Regulating the Molecular Interactions in Polymer Binder for High-Performance Lithium–Sulfur Batteries

Re‐Engineering Poly(Acrylic Acid) Binder toward Optimized Electrochemical Performance for Silicon Lithium‐Ion Batteries: Branching Architecture Leads to Balanced Properties of Polymeric Binders

Cycle performance improvement of LiFePO4 cathode with polyacrylic acid as binder

Stabilizing Zn 2 SiO 4 Anode by a Lithium Polyacrylate Binder for Highly Reversible Lithium-Ion Storage

Poly(Acrylic Acid)‐Based Polymer Binders for High‐Performance Lithium‐Ion Batteries: From Structure to Properties

Rational design of a novel polypyrrole-coated and zirconium-doped lithium vanadium phosphate with outstanding rate performance for lithium-ion storage

Improved electrochemical performance of a Li3V2(PO4)3 cathode in a wide potential window for lithium-ion storage by surface N-doped carbon coating and bulk K-doping

Amphipathic Emulsion Binder for Enhanced Performance of Lithium-Sulfur Batteries

Surface Engineering of Li- and Mn-rich Layered Oxides for Superior Li-ion Battery

New Insights into the Mechanism of Enhanced Performance of Li[Ni 0.8 Co 0.1 Mn 0.1 ]O 2 with a Polyacrylic Acid-Modified Binder

Novel High-Rate Performance of Dual Carbon-Coated Li3V2(PO4)3 Materials Used in an Aqueous Electrolyte