Abstract:By using the capacitive measurement principle, high-performance micromechanical accelerometers provide low noise and power consumption, cost efficiency, and reliability. Capacitive sensors based on changes in the gap between the electrodes, as a rule, require closed-loop control, which increases the level of complexity of the measurement circuit and increases power consumption. Capacitive sensitive elements with a change in the electrode overlap area have a good linearity of the capacitance versus displacement and a large measurement range, but they are more difficult to manufacture. This paper presents and investigates a model of a sensitive element of a sandwich design of a capacitive micromechanical accelerometer, the functioning of which is based on the use of a change in the relative dielectric constant of the dielectric of capacitors due to the introduction of a movable inertial mass between the electrodes of the capacitors, moving under the action of acceleration. As a result, there is a change in capacitance in the output measuring circuit. It is shown that the considered model is sensitive to acceleration and resistant to temperature changes, with low residual mechanical stress in the sensitive element. The modeling and calculations are performed using the Ansys and SolidWorks software. It is found that the movement of the moving mass along the axis of sensitivity X is more than five times the movement of the moving mass along the nonworking axes, and the change in the capacitance between the electrodes along the axis X is almost 2500 times more than the changes in capacitance between electrodes along the nonworking axes Z and Y . Calculations have shown that for all values of the acting acceleration (up to 30 g), the mechanical stress in the sensitive element is much less than the ultimate strength of silicon, equal to 440 MPa. It is found that variation of the temperature from –40 to 85°C leads to minor changes in capacitance along the working axis (0.0025–0.003 pF). This indicates the temperature stability of the investigated micromechanical accelerometer sensing element. The results of the analysis show that the developed and investigated model of the sensitive element of the sandwich design ensures the sensitivity of the micromechanical accelerometer and the stability of its parameters.

An Improved Equivalent Electrical Model for the Sensing Element of an Accelerometer with Comb Finger Dynamics

Accurate mechanical-optical theoretical model of cross-axis sensitivity of an interferometric micro-optomechanical accelerometer

A Stiffness-Tunable MEMS Accelerometer

Sensitivity Model of Micro-machined Accelerometers Based on the Deviation of Comb Finger Gaps

System-level Modeling and Simulation for an Electrostatic-Feedback Microaccelerometer Based on Equivalent Electrical Representation

Design and Simulation of A Multi-Finger Micromechanical Silicon Accelerometer

Sensitivity Deviation Probability Model of Close Loop Micro- Accelerometer Based on Comb Finger Gaps MEMS Process Error

Design and Realization of Comb-Finger Micromechanical Accelerometer

Modeling the Sensitive Element of the Sandwich Construction of a Capacitive Micromechanical Accelerometer, Taking into Account the Change in the Dielectric Constant

RESEARCH ON A MICRO-ACCELEROMETER’S SYSTEMIC MODELING BASED ON EQUIVALENT CIRCUIT METHOD

A New Analytical Model of Single-Stage Microleverage Mechanism in Resonant Accelerometer

NEW HINGED MICROMACHINED HIGH-g ACCELEROMETER: MODELLING AND MECHANICAL ANALYSIS

Analysis and Optimization on Dynamic Characteristics and Important Parameters of Force Feedback Accelerometer

Modeling Of Beams' Multiple-Contact Mode With An Application In The Design Of A High-G Threshold Microaccelerometer

Multiple-Degree-of-Freedom Modeling and Simulation for Seismic-Grade Sigma-Delta MEMS Capacitive Accelerometers

Nonlinearity Analysis of Closed-Loop ΣΔ Micro-Mechanical Accelerometer

Modeling of Capacitive Microaccelerometers with Squeeze Film Damping and Electrostatic Effects Using Model Order Reduction

Leverage Model and Optimal Design for Micromechanical Resonant Accelerometer

Design and Analysis of a Multi-Finger Micromechanical Silicon Accelerometer

Versatile and Effective Design Platform for Surface Acoustic Wave Accelerometers

Systematic Error Analysis and Modeling of MEMS Close-Loop Capacitive Accelerometer.