Abstract:In the article, pure gadolinium doped ceria (GDC) is considered as a fuel electrode in high temperature CO2 electrolysis utilizing electrolyte‐supported single cells. The electrochemical performance and long–term stability are investigated and compared with state‐of‐the‐art materials. By impedance and distribution of relaxation time analysis the processes during several operation conditions are evaluated. In this work, the performance, electrochemical processes, and stability of GDC (Ce0.8Gd0.2O1.9) fuel electrode containing single cells (GDC/8YSZ/GDC/LSCF) were examined in CO2 electrolysis conditions. The current density and area specific resistance is determined for different operation conditions. The examined cells showed a higher performance compared to state‐of‐the‐art Ni−YSZ fuel electrode (Ni‐YSZ/8YSZ/GDC/LSCF) based single cells with a similar production route. Furthermore, the cells were examined by means of electrochemical impedance spectroscopy (EIS) and the recorded data were evaluated by the distribution of relaxation times (DRT) analysis. An equivalent circuit model (ECM) consisting of four time constants and a Gerischer impedance (LR−RQ1−RQ2−G−RQ4−RQ5) was established to gain further insight into the individual processes in the cells. For instance, the low–frequency process P5 referring to RQ5 is the rate‐determining step in CO2 electrolysis and is assigned to a surface reaction including the charge transfer and possibly the gas diffusion in the GDC fuel electrode. A long–term stability test was performed in CO2 electrolysis conditions at 900 °C with a constant current load of −0.5 A ⋅ cm−2 for up to 1200 h. A degradation rate of 62 mV ⋅ kh−1 was observed. By EIS analysis, a similar contribution of the ohmic and polarization resistances to the degradation was determined. The low–frequency process P5 and thus the surface reaction including the charge transfer in the GDC fuel electrode is contributing most to the increase in polarization resistance. After the long–term stability test, scanning electron microscopy (SEM) analysis was carried out and a coarsening of GDC particles in the fuel electrode was observed.

Performance Evaluation of an Anode-Supported Solid Oxide Fuel Cell with Ce0.8Sm0.2O1.9 Impregnated GdBaCo2O5+δ Cathode

Preparation of SDC Interlayer and Influence on Performances of Anode Supported Solid Oxide Fuel Cells

Performances of YBaCo1.4Cu0.6O5+δ–Ce0.8Sm0.2O1.9 Composite Cathodes for Intermediate-Temperature Solid Oxide Fuel Cells

Anode Performance of Mn-doped Ceria–scsz for Solid Oxide Fuel Cell

Fabrication and Electrochemical Characterization of Anode-Supported Microtubular Solid Oxide Fuel Cells Based on Ce0.8sm0.2o2-D Electrolytes

Intermediate-temperature Electrochemical Performance of a Polycrystalline PrBaCo2O5+δ Cathode on Samarium-Doped Ceria Electrolyte

Preparation and characterization of nanocrystalline Ce0.8Sm0.2O1.9 for low temperature solid oxide fuel cells based on composite electrolyte

Properties and Performance of Ba0.5Sr0.5Co0.8Fe0.2O3−δ + Sm0.2Ce0.8O1.9 Composite Cathode

Electrochemical Performance of a Solid Oxide Fuel Cell Based on Ce0.8Sm0.2O2−δ Electrolyte Synthesized by a Polymer Assisted Combustion Method

Low Temperature Co-Sintering of Sr2Fe1.5Mo0.5O6−δ–Gd0.1Ce0.9O2−δ Anode-Supported Solid Oxide Fuel Cells with Li2O–Gd0.1Ce0.9O2−δ Electrolyte

Nanostructured GDC-impregnated La0.7Ca0.3CrO3−δ symmetrical electrodes for solid oxide fuel cells operating on hydrogen and city gas

Evaluation of BaZr0.1Ce0.7Y0.2O3−δ-based Proton-Conducting Solid Oxide Fuel Cells Fabricated by a One-Step Co-Firing Process

Performance of Ni/Scsz Cermet Anode Modified by Coating with Gd0.2ce0.8o2 for an Sofc Running on Methane Fuel

Solid oxide fuel cell with a spin-coated yttria stabilized zirconia/gadolinia doped ceria bi-layer electrolyte

A cathode-supported SOFC with thin Ce0.8Sm0.2O1.9 electrolyte prepared by a suspension spray

Composite Electrolyte Based On Nanostructured Ce0.8sm0.2o1.9 (Sdc) For Low-Temperature Solid Oxide Fuel Cells

Fabrication and Optimization of La 0.4 Sr 0.6 Co 0.2 Fe 0.7 Nb 0.1 O 3- Δ Electrode for Symmetric Solid Oxide Fuel Cell with Zirconia Based Electrolyte

High-performance SOFCs with Impregnated Sr2Fe1.5Mo0.5O6-δ Anodes Toward Sulfur Resistance

Fabrication and Performance of Ceramic Anode-Supported Solid Oxide Fuel Cells

High performance proton-conducting solid oxide fuel cells with a stable Sm0.5Sr0.5Co3-δ-Ce0.8Sm0.2O2-δ composite cathode

Gadolinium Doped Ceria as Nickel–Free Fuel Electrode in High Temperature CO2‐Electrolysis