Abstract:Solid oxide fuel cell (SOFC) has experienced a growing interest in the last few decades because of generating energy more efficiently than the conventional combustion of fossil fuels. By using the same material as anode and cathode of symmetric solid oxide fuel cell (SSOFC), the production of reliable and repeatable cells would be simpler. In this work, La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ (LSCFN) has been investigated firstly as potential cathode material for SOFC. The cathode polarization resistances are only 0.1 Ω cm2 at 800 oC. The stability of phase structure, electrode microstructure and polarization resistances for the LSCFN in the atmosphere of air have been studied. Then, LSCFN have been investigated as potential anode material for SOFC. The results show that LSCFN have high catalytic activity in methane catalytic combustion reaction, the total conversion temperature of 1% CH4 using LSCFN as catalyst was as low as 650 oC. The performance of carbon-resistance and sulfur-tolerance in SOFC were studied using LSCFN ceramic anode with La0.8Sr0.2Ga0.83Mg0.17O3-δ (LSGM) electrolyte. Long-term operation of such single cell under methane lasted for 120 hours without degradation. The output power density fueled with H2-50 ppm H2S was stable enough in 120 hours’ operation which indicated a good sulfur-tolerant performance. Finally, the maximum power densities generated by the SSOFC cell with LSCFN electrode are 650 mW cm-2 in H2, and the cell maximum power output has demonstrated to be not affected by the redox cycling of the anode during a total of 21 cyclic testing, indicating that the LSCFN has excellent redox stability. All of these results indicate that LSCFN can potentially be a promising candidate for the electrode material of SSOFC.

High-performance SOFCs with Impregnated Sr2Fe1.5Mo0.5O6-δ Anodes Toward Sulfur Resistance

Sulfur‐Tolerant Hierarchically Porous Ceramic Anode‐Supported Solid‐Oxide Fuel Cells with Self‐Precipitated Nanocatalyst

Low Temperature Co-Sintering of Sr2Fe1.5Mo0.5O6−δ–Gd0.1Ce0.9O2−δ Anode-Supported Solid Oxide Fuel Cells with Li2O–Gd0.1Ce0.9O2−δ Electrolyte

Sr2Fe1.5Mo0.5O6−δ- Sm0.2Ce0.8O1.9Composite Anodes for Intermediate-Temperature Solid Oxide Fuel Cells

Fabrication and Performance of Ceramic Anode-Supported Solid Oxide Fuel Cells

Characterization of Symmetrical SrFe0.75Mo0.25O3−δ Electrodes in Direct Carbon Solid Oxide Fuel Cells

Coking-Resistance and Sulfur-Tolerance Study of La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ Anode

Proton Conducting Intermediate-Temperature Solid Oxide Fuel Cells Using New Perovskite Type Cathodes

Infiltrated Sr 2 Fe 1.5 Mo 0.5 O 6 /la 0.9 Sr 0.1 Ga 0.8 Mg 0.2 O 3 Electrodes Towards High Performance Symmetrical Solid Oxide Fuel Cells Fabricated by an Ultra-Fast and Time-Saving Procedure

Electrochemical Performance and Anode Reaction Process for Ca Doped Sr2Fe1·5Mo0·5O6-δ As Electrodes for Symmetrical Solid Oxide Fuel Cells

Electrochemical Performance of Symmetric Solid Oxide Cells Employing a Sc-doped SrFeO3-δ-based Electrode

Improving stability and electrochemical performance of Ba0.5Sr0.5Co0.2Fe0.8O3-δ electrode for symmetrical solid oxide fuel cells by Mo doping

Sr2Fe1.5Mo0.5O6 As Cathodes for Intermediate-Temperature Solid Oxide Fuel Cells with La0.8Sr0.2Ga0.87Mg0.13O3 Electrolyte

A cathode-supported SOFC with thin Ce0.8Sm0.2O1.9 electrolyte prepared by a suspension spray

Molybdenum-based Double Perovskites A2CrMoO6− (A = Ca, Sr, Ba) As Anode Materials for Solid Oxide Fuel Cells

Improved Performance of Symmetrical Solid Oxide Fuel Cells with Redox-reversible Pr0.6Sr0.4Co0.2Fe0.8O3-δElectrodes

A Redox-Stable Direct-Methane Solid Oxide Fuel Cell (SOFC) with Sr2FeNb0.2Mo0.8O6−δ Double Perovskite As Anode Material

Improving stability and electrochemical performance of Ba 0.5 Sr 0.5 Co 0.2 Fe 0.8 O 3-5 electrode for symmetrical solid oxide fuel cells by Mo doping

Improved Performance of Symmetrical Solid Oxide Fuel Cells with Redox-reversible Pr$lt;inf$gt;0.6$lt;/inf$gt;Sr$lt;inf$gt;0.4$lt;/inf$gt;Co$lt;inf$gt;0.2$lt;/inf$gt;Fe$lt;inf$gt;0.8$lt;/inf$gt;O$lt;inf$gt;3-delta$lt;/inf$gt; Electrodes

Low Temperature Solid Oxide Fuel Cell with Ba0.5sr0.5co0.8fe0.2o3 Cathode Prepared by Screen Printing

Novel, Cobalt-Free, and Highly Active Sr2Fe1.5Mo0.5−xSnxO6−δ Cathode Materials for Intermediate Temperature Solid Oxide Fuel Cells