Abstract:This study evaluates the electrochemical performance of Gd0.1Ce0.9O1.95 (GDC10) cathodes infiltrated with bimetallic Ni-Co and Ni-Cu alloy electrocatalysts for CO2 electroreduction in solid oxide electrolyzer cells (SOECs). The electrochemical reduction performance of SOECs with cathodes infiltrated with Ni-Co and Ni-Cu alloys was compared to the performance of SOECs having cathodes infiltrated with Ni, Co, and Cu. Electrochemical performance was evaluated at 750, 800, and 850 °C. Cells with Co, Ni0.50Co0.50, Ni0.75Co0.25, and Ni infiltrated cathodes displayed relatively similar CO2 electroreduction performance; however, SOECs having Co infiltrated cathodes had slightly better catalytic performance towards CO2 reduction as demonstrated by their lower polarization resistance (Rp) values of 8.54, 4.03, and 1.25 Ω·cm2 when measured under open circuit voltage (OCV) at 750, 800, and 850 °C, respectively. Cells having Co, Ni0.50Co0.50, Ni0.75Co0.25, and Ni infiltrated cathodes showed a stable long-term CO2 electroreduction performance with Faradaic efficiency values approaching 100 % when tested under 0.20 A·cm−2 for 48 h and at 750 °C. Results indicate that SOECs with Ni infiltrated cathodes possessed better short- and long-term CO2 electroreduction performance compared to SOECs featuring cathodes infiltrated with Cu, Ni0.25Cu0.75, and Ni0.50Cu0.50. Increasing Ni percentage within the Ni-Cu alloy structure had a positive impact on the electrochemical performance as cells with Ni0.50Cu0.50 infiltrated cathodes showed relatively close voltage values to those of cells with Ni infiltrated cathodes during short-term galvanostatic tests. Although the SOEC with Ni0.50Cu0.50 infiltrated cathode experienced performance degradation throughout the long-term test period, it demonstrated better electroreduction performance having Faradaic efficiency values approaching 100 % compared to cells with Cu and Ni0.25Cu0.75 infiltrated cathodes when evaluated under 0.20 A·cm−2 for 48 h and at 750 °C.

Infiltration of Ce0.8Gd0.2O1.9 Nanoparticles on Sr2Fe1.5Mo0.5O6- Cathode for CO2 Electroreduction in Solid Oxide Electrolysis Cell

Bismuth doped Sr2Fe1.5Mo0.5O6-3 double perovskite as a robust fuel electrode in ceramic oxide cells for direct CO2 electrolysis

Effect of Gd0.2Ce0.8O1.9 Nanoparticles on the Oxygen Evolution Reaction of La0.6Sr0.4Co0.2Fe0.8O3-δ Anode in Solid Oxide Electrolysis Cell

In situ exsolved FeNi3 nanoparticles on nickel doped Sr2Fe1.5Mo0.5O6−δ perovskite for efficient electrochemical CO2 reduction reaction

Efficient CO2 Electroreduction on a Solid Oxide Electrolysis Cell with La0.6Sr0.4Co0.2Fe0.8O3−δ-Gd0.2Ce0.8O2-δ Infiltrated Electrode

In-situ passivation of Fe nanoparticles exsolved from perovskite cathodes through Zinc doping for CO2 electrolysis

Self-optimized and Stable Nanocomposites Via One-Pot Synthesis for High-Temperature CO2 Electrolysis in Solid Oxide Electrolysis Cells

Carbon dioxide reduction in solid oxide electrolyzer cells using transition metals infiltrated into Gd0.1Ce0.9O1.95 (GDC10) scaffolds

Carbon dioxide reduction in solid oxide electrolyzer cells utilizing nickel bimetallic alloys infiltrated into Gd0.1Ce0.9O1.95 (GDC10) scaffolds

Gd 0.2 Ce 0.8 O 1.9 纳米颗粒对固体氧化物电解池La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3- δ 阳极析氧反应的影响

Enhancing the CO2 Electrolysis Performance by Ce Doped La0⋅7Sr0⋅3Fe0⋅9Ni0⋅1O3-δ Electrode in Symmetric Solid Oxide Electrolysis Cell

Robust Cobalt-Free Perovskite Type Electrospun Nanofiber Cathode for Efficient Electrochemical Carbon Dioxide Reduction Reaction

Enhanced Performance of La<sub>0.8</sub>Sr<sub>0.2</sub>FeO<sub>3-</sub>-Gd<sub>0.2</sub>Ce<sub >0.8</sub>O<sub>2-</sub> Cathode for Solid Oxide Fuel Cells by Surface Modification with BaCO<sub>3</sub> Nanoparticles

Mixed-Conductor Sr2fe1.5mo0.5o6-Delta As Robust Fuel Electrode For Pure Co2 Reduction In Solid Oxide Electrolysis Cell

Perovskite Oxyfluoride Ceramic with in Situ Exsolved Ni-Fe Nanoparticles for Direct CO2 Electrolysis in Solid Oxide Electrolysis Cells.

A High‐Entropy Layered Perovskite Coated with In‐situ Exsolved Core‐shell CuFe@FeOx Nanoparticles for Efficient CO2 Electrolysis

Anion Fluorine-Doped La<sub>0.6</sub>Sr<sub>0.4</sub>Fe<sub>0.8</sub>Ni<sub>0.2</sub>O<sub>3- </sub> Perovskite Cathodes with Enhanced Electrocatalytic Activity for Solid Oxide Electrolysis Cell Direct CO<sub>2</sub> Electrolysis

Enhancing electrocatalytic CO 2 reduction in solid oxide electrolysis cell with Ce 0.9 Mn 0.1 O 2−δ nanoparticles-modified LSCM-GDC cathode

Two-Fold Improvement in Chemical Adsorption Ability to Achieve Effective Carbon Dioxide Electrolysis

Enhancing CO2 Electrolysis Performance with Vanadium-Doped Perovskite Cathode in Solid Oxide Electrolysis Cell

Interface Engineering of La0.6Sr0.4Co0.2Fe0.8O3−δ/Gd0.1Ce0.9O1.95 Heterostructure Oxygen Electrode for Solid Oxide Electrolysis Cells with Enhanced CO2 Electrolysis Performance