Abstract:This study evaluates the electrochemical performance of Gd0.1Ce0.9O1.95 (GDC10) cathodes infiltrated with bimetallic Ni-Co and Ni-Cu alloy electrocatalysts for CO2 electroreduction in solid oxide electrolyzer cells (SOECs). The electrochemical reduction performance of SOECs with cathodes infiltrated with Ni-Co and Ni-Cu alloys was compared to the performance of SOECs having cathodes infiltrated with Ni, Co, and Cu. Electrochemical performance was evaluated at 750, 800, and 850 °C. Cells with Co, Ni0.50Co0.50, Ni0.75Co0.25, and Ni infiltrated cathodes displayed relatively similar CO2 electroreduction performance; however, SOECs having Co infiltrated cathodes had slightly better catalytic performance towards CO2 reduction as demonstrated by their lower polarization resistance (Rp) values of 8.54, 4.03, and 1.25 Ω·cm2 when measured under open circuit voltage (OCV) at 750, 800, and 850 °C, respectively. Cells having Co, Ni0.50Co0.50, Ni0.75Co0.25, and Ni infiltrated cathodes showed a stable long-term CO2 electroreduction performance with Faradaic efficiency values approaching 100 % when tested under 0.20 A·cm−2 for 48 h and at 750 °C. Results indicate that SOECs with Ni infiltrated cathodes possessed better short- and long-term CO2 electroreduction performance compared to SOECs featuring cathodes infiltrated with Cu, Ni0.25Cu0.75, and Ni0.50Cu0.50. Increasing Ni percentage within the Ni-Cu alloy structure had a positive impact on the electrochemical performance as cells with Ni0.50Cu0.50 infiltrated cathodes showed relatively close voltage values to those of cells with Ni infiltrated cathodes during short-term galvanostatic tests. Although the SOEC with Ni0.50Cu0.50 infiltrated cathode experienced performance degradation throughout the long-term test period, it demonstrated better electroreduction performance having Faradaic efficiency values approaching 100 % compared to cells with Cu and Ni0.25Cu0.75 infiltrated cathodes when evaluated under 0.20 A·cm−2 for 48 h and at 750 °C.

Carbon dioxide reduction in solid oxide electrolyzer cells using transition metals infiltrated into Gd0.1Ce0.9O1.95 (GDC10) scaffolds

Carbon dioxide reduction in solid oxide electrolyzer cells utilizing nickel bimetallic alloys infiltrated into Gd0.1Ce0.9O1.95 (GDC10) scaffolds

Infiltration of Ce0.8Gd0.2O1.9 Nanoparticles on Sr2Fe1.5Mo0.5O6- Cathode for CO2 Electroreduction in Solid Oxide Electrolysis Cell

Efficient CO2 Electroreduction on a Solid Oxide Electrolysis Cell with La0.6Sr0.4Co0.2Fe0.8O3−δ-Gd0.2Ce0.8O2-δ Infiltrated Electrode

In situ self-assembled NdBa0.5Sr0.5Co2O5+δ/Gd0.1Ce0.9O2-δ hetero-interfaces enable enhanced electrochemical activity and CO2 durability for solid oxide fuel cells

Enhancing Electrochemical Efficiency of Solid Oxide Electrolysis Cells for Carbon Dioxide Reduction Through Nickel‐Doped Titanate‐Based Cathode with Doped Ceria Electrolyte

Fabrication, Sintering and Electrical Properties of Cobalt Oxide Doped Gd0.1Ce0.9O2−δ

Effect of Gd 0.2 Ce 0.8 O 1.9 Nanoparticles on the Oxygen Evolution Reaction of La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3- Δ Anode in Solid Oxide Electrolysis Cell

Boosted electrochemical performance of ca‐cobaltite‐based composite electrodes for reversible solid oxide cells

Densification of Ce0.9Gd0.1O2-δ Interlayer to Improve the Stability of La0.6Sr0.4Co0.2Fe0.8 O3-δ/Ce0.9Gd0.1O2-δ Interface and SOFC

(La0.75Sr0.25)0.95(Cr0.5Mn0.5)O3-δ-Ce0.8Gd0.2O1.9 scaffolded composite cathode for high temperature CO2 electroreduction in solid oxide electrolysis cell

Performance enhancement of Cu decorated LSCM-GDC composite cathode for CO2 electroreduction

Enhancing electrocatalytic CO 2 reduction in solid oxide electrolysis cell with Ce 0.9 Mn 0.1 O 2−δ nanoparticles-modified LSCM-GDC cathode

Enhancing CO2 Electrolysis Performance with Vanadium-Doped Perovskite Cathode in Solid Oxide Electrolysis Cell

Self-optimized and Stable Nanocomposites Via One-Pot Synthesis for High-Temperature CO2 Electrolysis in Solid Oxide Electrolysis Cells

Fe-decorated on Sm-doped CeO2 as cathodes for high-temperature CO2 electrolysis in solid oxide electrolysis cells

Constructing Nano-Au/reduced-ceo2 Interface Through High Cathodic Voltage in Solid Oxide Electrolysis Cells at High Temperature

Enhanced high-temperature CO 2 electrolysis on CeO 2 by inducing under-coordinated dual-atom active sites

High-performance and CO2‐resistant cathode toward electrocatalytic oxygen reduction for solid oxide fuel cells: Doped ceria and SrCo0.7Nb0.1Ni0.2O3-δ composite

In situ exsolved Fe nanoparticles enhance the catalytic performance of perovskite cathode materials in solid oxide electrolytic cells

Nanostructured GDC-impregnated La0.7Ca0.3CrO3−δ symmetrical electrodes for solid oxide fuel cells operating on hydrogen and city gas