Abstract:Solid oxide electrolysis cells (SOECs) can efficiently convert the greenhouse‐gas CO2 to valuable fuel CO at the cathodes. Herein, fluorine is doped into mixed ionic–electronic conducting Sr2Fe1.5Mo0.5O6‐δ (SFM), to evaluate its potential use as a cathode for CO2 reduction reaction (CO2‐RR). SFM retains its cubic structure after doped with fluorine, forming perovskite oxyfluoride Sr2Fe1.5Mo0.5O6‐δF0.1 (F‐SFM). The substitution of oxygen by fluorine increases CO2 adsorption by a factor of ≈2, bulk oxygen vacancy concentration by 35–37% at 800 °C, and consequently enhances the surface reaction rate constant for CO2‐RR and chemical bulk diffusion coefficient by factors of 2–3. The faster kinetics are also reflected by a lower polarization resistance of 0.656 Ω cm2 for F‐SFM than 1.130 Ω cm2 for SFM at 800 °C in symmetrical cells. Furthermore, the single cell with F‐SFM cathode exhibits the best CO2 electrolysis performance among the reported perovskite electrodes, achieving current density of 1.36 A cm−2 at 1.5 V and excellent stability over 120 h at 800 °C under harsh conditions. The theoretical computations confirm that fluorine doping is energetically favorable to CO2 adsorption and dissociation. The present work provides a promising strategy for the design of robust cathodes for direct CO2 electrolysis in SOECs. Solid oxide electrolysis cells are promising energy conversion devices that can efficiently convert CO2 to CO and O2. However, their use is impeded mainly due to the absence of a highly active and durable cathode. This work successfully demonstrates that a SOEC with fluorine‐doped perovskite Sr2Fe1.5Mo0.5O6‐δ cathode enables direct electrolyzing of CO2 with excellent performance and durability.

Two-Fold Improvement in Chemical Adsorption Ability to Achieve Effective Carbon Dioxide Electrolysis

Bismuth doped Sr2Fe1.5Mo0.5O6-3 double perovskite as a robust fuel electrode in ceramic oxide cells for direct CO2 electrolysis

Bismuth Doped Sr2Fe1.5Mo0.5O6-δ Double Perovskite As a Robust Fuel Electrode in Ceramic Oxide Cells for Direct CO2 Electrolysis

In-situ passivation of Fe nanoparticles exsolved from perovskite cathodes through Zinc doping for CO2 electrolysis

Boosting CO2 directly electrolysis by electron doping in Sr2Fe1.5Mo0.5O6-δ double perovskite cathode

Perovskite Oxyfluoride Electrode Enabling Direct Electrolyzing Carbon Dioxide with Excellent Electrochemical Performances

Realizing Efficient Activity and High Conductivity of Perovskite Symmetrical Electrode by Vanadium Doping for CO2 Electrolysis

Robust Cobalt-Free Perovskite Type Electrospun Nanofiber Cathode for Efficient Electrochemical Carbon Dioxide Reduction Reaction

Enhancing CO2 Electrolysis Performance with Vanadium-Doped Perovskite Cathode in Solid Oxide Electrolysis Cell

Reducing d-p band coupling to enhance CO2 electrocatalytic activity by Mg-doping in Sr2FeMoO6-δ double perovskite for high performance solid oxide electrolysis cells

Achieving strong chemical adsorption ability for efficient carbon dioxide electrolysis

Enhancing catalytic activity of CO 2 electrolysis via B-site cation doped perovskite cathode in solid oxide electrolysis cell

Fluorine-doped perovskite cathodes with boosted electrocatalytic activity for CO 2 electrolysis

Enhanced activities of CO2 electrolysis in solid oxide electrolysis cells via in-situ tailoring of La0.75Sr0.25Cr0.5Mn0.4Fe0.1O3-δ/Fe2P heterointerfaces

Constructing perovskite/alkaline-earth metal composite heterostructure by infiltration to revitalize CO2 electrolysis

In situ exsolved Fe nanoparticles enhance the catalytic performance of perovskite cathode materials in solid oxide electrolytic cells

Pd Single Site-Anchored Perovskite Cathode for CO2 Electrolysis in Solid Oxide Electrolysis Cells

Boosting electrochemical CO 2 directly electrolysis by tuning the surface oxygen defect of perovskite

Active Cu and Fe Nanoparticles Codecorated Ruddlesden–Popper‐Type Perovskite as Solid Oxide Electrolysis Cells Cathode for CO2 Splitting

Infiltration of Ce0.8Gd0.2O1.9 Nanoparticles on Sr2Fe1.5Mo0.5O6- Cathode for CO2 Electroreduction in Solid Oxide Electrolysis Cell

Modification of LSCM Structure by Anchoring Alloy Nanoparticles for Efficient CO 2 Electrolysis