Abstract:Solid-state lithium metal batteries attract much attention for their high theoretical specific capacity and safety. However, the poor interfacial combination between the solid electrolyte (SE) and Li anode usually results in unavoidable growth of Li dendrites and interfacial side reactions. In this work, we propose a simple and effective strategy to modify the interface of the electrolyte/Li anode by scraping a graphite layer on the electrolyte surface facing the anode. The graphite-modified solid electrolyte (G-SE) has a high electrochemical potential window exceeding 4.6 V and high ion conductivity of 3.08 × 10–4 S·cm–2 at ambient temperature. This G-SE membrane is suitable for high-voltage solid-state lithium metal batteries, the assembled NCM622/G-SE/Li cell shows an initial capacity of 160 mAh/g at 0.5 C and a retention capacity of 100 mAh/g after 200 cycles. The good electrochemical performance is attributed to the graphite interfacial modification; the graphite coating and Li can spontaneously react to form a LiC6 layer, which improves the SE/Li interfacial combination and suppresses the growth of lithium dendrites and interfacial side reactions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c05153?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c05153</a>.EDS point analysis for the Li sheet after cycling (Figure S1); enlarged images of <a class="internalNav" href="#fig6">Figure </a><a class="internalNav" href="#fig6">6</a>a (Figure S2); battery case with test window (Figure S3); C 1s XPS spectrum of the Li sheet with graphite after cycling (Figure S4); lithium metal optical microscope image (Figure S5); digital photo of the lithium metal after 24 h of lithium/G-SE/lithium battery shelving (Figure S6); and the ion transport number calculation table (Table S1) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c05153/suppl_file/sc0c05153_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Electrochemical Behavior of A Graphite Electrode Prepared by Anodic Electrophoretic Deposition

Electrochemically exfoliated graphite as a highly efficient conductive additive for an anode in lithium‐ion batteries

Catalytic Decomposition of Ethylene Carbonate by Pyrrolic-N to Stabilize Solid Electrolyte Interphase on Graphite Anode under Extreme Conditions

Topic : Electrochemical Application of Carbon Materials MILD-EXFOLIATED GRAPHITE AS AN ANODE MATERIAL FOR LITHIUM ION BATTERY

Effects of Pre‐Electroplated Metal Or/and Graphene on the Initial Coulombic Efficiency of Graphite Anode

Electrostatic Modification of Expanded Graphite Cathode for High-performance Aluminum-ion Batteries

Dendrite/Volume Expansion-Free Lithium Deposition Inside the Enclosed Nanoscale Space of Electrochemically Modified Graphite

Expanded-graphite embedded in lithium metal as dendrite-free anode of lithium metal batteries

Highly Efficient Interface Modification between Poly(Propylene Carbonate)-Based Solid Electrolytes and a Lithium Anode by Facile Graphite Coating

A simplified electrophoretic deposition route for sandwiched structure-based Mn3O4/G composite electrodes as high-capacity anodes for lithium-ion batteries

In-situ Polymerization of P-Sulfonated Allyl Phenyl Ether Coated Graphite Electrode for Lithium Ion Battery

Resolution of Lithium Deposition versus Intercalation of Graphite Anodes in Lithium Ion Batteries: An In Situ Electron Paramagnetic Resonance Study

Correlating Graphite Surface with Interphase for Fast‐Charging and Low‐Temperature Operation

Scalable synthesis of Li2GeO3/expanded graphite as a high-performance anode for Li-ion batteries

Incorporating Α-Al2o3 Nanodots into Expanded Graphite Anodes Toward Stable Fast Charging for Lithium-Ion Batteries

Soft Carbon Filled in Expanded Graphite Layer Pores for Superior Fast-Charging Lithium-Ion Batteries

From Graphite to Porous Graphene-Like Nanosheets for High Rate Lithium-Ion Batteries

Influence of Particle Structure on Electrochemical Character of Composite Graphite

Towards Using Polybenzidine-Graphene Oxide Sheet on Graphite as a New System for Supercapacitor Device Fabrication

TiP2O7 and Expanded Graphite Nanocomposite as Anode Material for Aqueous Lithium-Ion Batteries

Green Synergy Conversion of Waste Graphite in Spent Lithium‐Ion Batteries to GO and High‐Performance EG Anode Material