Abstract:Solid-state lithium metal batteries attract much attention for their high theoretical specific capacity and safety. However, the poor interfacial combination between the solid electrolyte (SE) and Li anode usually results in unavoidable growth of Li dendrites and interfacial side reactions. In this work, we propose a simple and effective strategy to modify the interface of the electrolyte/Li anode by scraping a graphite layer on the electrolyte surface facing the anode. The graphite-modified solid electrolyte (G-SE) has a high electrochemical potential window exceeding 4.6 V and high ion conductivity of 3.08 × 10–4 S·cm–2 at ambient temperature. This G-SE membrane is suitable for high-voltage solid-state lithium metal batteries, the assembled NCM622/G-SE/Li cell shows an initial capacity of 160 mAh/g at 0.5 C and a retention capacity of 100 mAh/g after 200 cycles. The good electrochemical performance is attributed to the graphite interfacial modification; the graphite coating and Li can spontaneously react to form a LiC6 layer, which improves the SE/Li interfacial combination and suppresses the growth of lithium dendrites and interfacial side reactions.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c05153?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c05153</a>.EDS point analysis for the Li sheet after cycling (Figure S1); enlarged images of <a class="internalNav" href="#fig6">Figure </a><a class="internalNav" href="#fig6">6</a>a (Figure S2); battery case with test window (Figure S3); C 1s XPS spectrum of the Li sheet with graphite after cycling (Figure S4); lithium metal optical microscope image (Figure S5); digital photo of the lithium metal after 24 h of lithium/G-SE/lithium battery shelving (Figure S6); and the ion transport number calculation table (Table S1) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c05153/suppl_file/sc0c05153_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Highly Enforced Rate Capability of a Graphite Anode via Interphase Chemistry Tailoring Based on an Electrolyte Additive

Reversible Li Plating on Graphite Anodes through Electrolyte Engineering for Fast-Charging Batteries.

Dendrite/Volume Expansion-Free Lithium Deposition Inside the Enclosed Nanoscale Space of Electrochemically Modified Graphite

Graphitic carbon nitride (g-C3N4) as an electrolyte additive boosts fast-charging and stable cycling of graphite anodes for Li-ion batteries

Tuning Rate‐Limiting Factors for Graphite Anodes in Fast‐Charging Li‐Ion Batteries

Highly Efficient Interface Modification between Poly(Propylene Carbonate)-Based Solid Electrolytes and a Lithium Anode by Facile Graphite Coating

Synergy effect of regulated Li-plating and functional solid electrolyte interphase on graphite anodes

Incorporating Α-Al2o3 Nanodots into Expanded Graphite Anodes Toward Stable Fast Charging for Lithium-Ion Batteries

Constructing a Highly Robust Interface Film for Enhancing Rate Performance of Graphite Anode via a Novel Electrolyte Additive

Correlating Graphite Surface with Interphase for Fast‐Charging and Low‐Temperature Operation

Promoting the reversibility of lithium ion/lithium metal hybrid graphite anode by regulating solid electrolyte interface

Electrolyte Optimization for Graphite Anodes Toward Fast Charging

Reversible Lithium Plating in the Pores of a Graphite Electrode Delivers Additional Capacity for Existing Lithium-Ion Batteries Enabled by a Compatible Electrolyte

A Slightly Expanded Graphite Anode with High Capacity Enabled By Stable Lithium‐Ion/Metal Hybrid Storage

Boosting High-Voltage Practical Lithium Metal Batteries with Tailored Additives

Inhibiting Solvent Co‐Intercalation in a Graphite Anode by a Localized High‐Concentration Electrolyte in Fast‐Charging Batteries

Artificially regulated interphase on natural graphite realizes rapid charge and durable high-temperature cycling of Li-ion batteries

Tailoring the Mechanical and Electrochemical Properties of an Artificial Interphase for High‐Performance Metallic Lithium Anode

Eliminating Graphite Exfoliation with an Artificial Solid Electrolyte Interphase for Stable Lithium‐Ion Batteries

Constructing Densely Compacted Graphite/Si/SiO2 Ternary Composite Anodes for High-Performance Li-Ion Batteries

Isotropic Structure and Polymer Interface Intensified Lithium-Ion Transmission in Spherical Graphite Tailings/Coke Composite Anode