Abstract:Although Li metal is considered the most potential anode for Li based batteries, the repeatedly large volume variation and low Coulombic efficiency (CE) are still serious challenges for commercial application. Herein, the interconnect closed hollow graphene spheres with electronic-ionic bi-functional conduction network containing Li4.4Sn nanoparticles loaded internally and β-Li3PS4 solid electrolyte layer coated externally (β-LPS/SG/Li4.4Sn) is proposed to achieve uniform and dense Li deposition. Density functional theory (DFT) calculation and experimental results show that Li4.4Sn owns larger Li binding energy and lower nucleation overpotential than spherical graphene (SG), thus being able to guide Li traversing and depositing inside the hollow spheres. The Tafel curves, Li+ diffusion activation energy and experimental results reveal that the β-Li3PS4 coating layer significantly improves the ionic conductivity of the negative skeleton, covers the defect sites on the SG surface, provides continuous ion transmission channels and accelerates Li+ migration rate. The synergy of both can inhibit the formation of dendritic Li and reduce side reaction between freshly deposited lithium and the organic electrolyte. It's found that Li is preferentially deposited within the SG, evenly deposited on the spherical shell surface until it's completely filled to obtain a dense lithium layer without tip effect. As a result, the β-LPS/SG/Li4.4Sn anode exhibits a long life of up to 2800 h, an extremely low overpotential (∼13 mV) and a high CE of 99.8 % after 470 cycles. The LiFePO4-based full cell runs stably with a high capacity retention of 86.93 % after 800 cycles at 1C. It is considered that the novel structure design of Li anode skeleton with electron-ionic bi-functional conduction is a promising direction to construct long-term stable lithium metal anodes.

Expanded-graphite embedded in lithium metal as dendrite-free anode of lithium metal batteries

An Interconnected Silver Coated Carbon Cloth Framework As a Host to Reduce Lithium Nucleation Over-Potential for Dendrite-Free Lithium Metal Anodes

Realizing Holistic Charging–Discharging for Dendrite-Free Lithium Metal Anodes Via Constructing Three-Dimensional Li+ Conductive Networks

Mesoporous Graphene Hosts for Dendrite-Free Lithium Metal Anode in Working Rechargeable Batteries

Stabilized Li metal anode with robust C-Li3N interphase for high energy density batteries

Lithiophilic Hydrogen-Substituted Graphdiyne Aerogels with Ionically Conductive Channels for High-Performance Lithium Metal Batteries

Partly Lithiated Graphitic Carbon Foam As 3D Porous Current Collectors for Dendrite-Free Lithium Metal Anodes

Large-scale synthesis of high-quality lithium-graphite hybrid anodes for mass-controllable and cycling-stable lithium metal batteries

A Dendrite‐Free Lithium Metal Anode Enabled by Designed Ultra‐Thin MgF 2 Nanosheets Encapsulated inside Nitrogen‐Doped Graphene‐Like Hollow Nanospheres

Columnar Lithium Deposition Guided by Graphdiyne Nanowalls Toward a Stable Lithium Metal Anode.

Composite Lithium Metal Anode Via a Simple Rolling-Cutting Method

Fast-charging and Dendrite-Free Lithium Metal Anode Enabled by Partial Lithiation of Graphene Aerogel

Dendrite-Free lithium electrode enabled by graphene aerogels with gradient porosity

High energy density lithium metal batteries enabled by a porous graphene/MgF<sub>2</sub> framework

High energy density lithium metal batteries enabled by a porous graphene/MgF2 framework

High Areal Capacity and Lithium Utilization in Anodes Made of Covalently Connected Graphite Microtubes

In-situ Generated Li3N/Li-Al Alloy in Reduced Graphene Oxide Framework Optimizing Ultra-Thin Lithium Metal Electrode for Solid-State Batteries

Graphitic Carbon Nitride Induced Micro‐Electric Field for Dendrite‐Free Lithium Metal Anodes

Dendrite-free Li Metal Anodes with Confined Volume Change Towards Long Lifetime

Dendrite-free Li metal anode enabled by a 3D free-standing lithiophilic nitrogen-enriched carbon sponge

Electronic-ionic bi-functional conduction β-Li3PS4-coated graphene hollow spheres as a highly stable lithium metal anode skeleton