Abstract:An air-breathing micro direct methanol fuel cell (mu DMFC) with a compound anode flow field structure (composed of the parallel flow field and the perforated flow field) is designed, fabricated and tested. To better analyze the effect of the compound anode flow field on the mass transfer of methanol, the compound flow field with different open ratios (ratio of exposure area to total area) and thicknesses of current collectors is modeled and simulated. Micro process technologies are employed to fabricate the end plates and current collectors. The performances of the mu DMFC with a compound anode flow field are measured under various operating parameters. Both the modeled and the experimental results show that, comparing the conventional parallel flow field, the compound one can enhance the mass transfer resistance of methanol from the flow field to the anode diffusion layer. The results also indicate that the mu DMFC with an anode open ratio of 40% and a thickness of 300 mu m has the optimal performance under the 7 M methanol which is three to four times higher than conventional flow fields. Finally, a 2 h stability test of the mu DMFC is performed with a methanol concentration of 7 M and a flow velocity of 0.1 ml min(-1). The results indicate that the mu DMFC can work steadily with high methanol concentration.

Development of a 4-cell air-breathing micro direct methanol fuel cell stack

Development of a self-breathing silicon-based micro direct methanol fuel cell stack

Development and Characterization of A Novel Air-Breathing Micro Direct Methanol Fuel Cell Stack for Portable Applications

A micro-direct methanol fuel cell stack with optimized design and microfabrication

An Air-Breathing Micro Direct Methanol Fuel Cell Stack Employing a Single Shared Anode Using Silicon Microfabrication Technologies

Design and fabrication of a silicon-based micro direct methanol fuel cell stack

Experimental investigation of the dynamic performance of a microdirect methanol fuel cell stack for practical applications

Design, Fabrication and Testing of a Silicon-Based Air-Breathing Micro Direct Methanol Fuel Cell

Design, Optimization and Microfabrication of a Micro-Direct Methanol Fuel Cell with Microblocks in Anode Structure

Design, Fabrication and Testing of an Air-Breathing Micro Direct Methanol Fuel Cell with Compound Anode Flow Field

A Silicon-Based Micro Direct Methanol Fuel Cell Stack with Compact Structure and PDMS Packaging

Experimental Investigations of Anode Structure on the Performance of Air-Breathing Μdmfc

An Air-Breathing Micro Direct Methanol Fuel Cell with 3D KOH-Etched Cathode Structure

Silicon-based Micro Direct Methanol Fuel Cell with an N-inputs-N-outputs Anode Flow Pattern

Design Of Mems-Based Micro Direct Methanol Fuel Cell Stack

Design and Simulation of Air-Breathing Micro Direct Methanol Fuel Cells with Different Anode Flow Fields.

Performance Research of a Silicon-Based Micro Direct Methanol Fuel Cell

Effect of cathode gas flow patterns on performance of micro direct methanol fuel cell

Anode Flow Field Structures of Micro Direct Methanol Fuel Cell

Design of the Micro Passive Airbreathing Direct Methanol Fuel Cell Stack

A self-breathing metallic micro-direct methanol fuel cell with the improved cathode current collector