Abstract:In the telescope observation, the position of fiber will highly influence the spectra efficient input in the fiber to the spectrograph. When the fibers were back illuminated on the spectra end, they would export light on the positioner end, so the CCD cameras could capture the photo of fiber tip position covered the focal plane, calculates the precise position information by light centroid method and feeds back to control system. A set of fiber back illuminated system was developed which combined to the low revolution spectro instruments in LAMOST. It could provide uniform light output to the fibers, meet the requirements for the CCD camera measurement. The paper was introduced the back illuminated system design and different test for the light resource. After optimization, the effect illuminated system could compare with the integrating sphere, meet the conditions of fiber position measurement.Using parallel controlled fiber positioner as the spectroscopic receiver is an efficiency observation system for spectra survey, has been used in LAMOST recently, and will be proposed in CFHT and rebuilt telescope Mayall. In the telescope observation, the position of fiber will highly influence the spectra efficient input in the fiber to the spectrograph. When the fibers were back illuminated on the spectra end, they would export light on the positioner end, so the CCD cameras could capture the photo of fiber tip position covered the focal plane, calculates the precise position information by light centroid method and feeds back to control system. After many years on these research, the back illuminated fiber measurement was the best method to acquire the precision position of fibers. In LAMOST, a set of fiber back illuminated system was developed which combined to the low revolution spectro instruments in LAMOST. It could provide uniform light output to the fibers, meet the requirements for the CCD camera measurement and was controlled by high-level observation system which could shut down during the telescope observation. The paper was introduced the back illuminated system design and different test for the light resource. After optimization, the effect illuminated system could compare the integrating sphere, meet the conditions of fiber position measurement.

Atmospheric Dispersion Corrector for the Large Sky Area Multi-Object Fibre Spectroscopic Telescope

The Atmospheric Dispersion Corrector for the Large Sky Area Multi–object Fibre Spectroscopic Telescope (LAMOST)

The Optical Performance of LAMOST Telescope

The Large Sky Area Multi-Object Fibre Spectroscopy Telescope (Lamost) Project

Development and Test of Scientific CCD Camera for Large Sky Area Multi-object Fiber Spectroscopic Telescope

Active Optics in Lamost

An Advanced Atmospheric Dispersion Corrector: The Magellan Visible AO Camera

The development of an optical design tool for atmospheric dispersion correction

A 30-M Submillimeter Telescope with Active Reflector

Progress in the LAMOST optical system

Optical system for extremely large spectroscopic survey telescope

Southern Lamost For All Sky Spectroscopic Survey

On-sky closed loop correction of atmospheric dispersion for high-contrast coronagraphy and astrometry

LAMOST large sky area simulation under real observation time

Number and Distribution of Fiducial Fibers in a Spectroscopic Survey Telescope

Back-illuminate Fiber System Research for Multi-Object Fiber Spectroscopic Telescope

Implementary Scheme of Parallel Controllable Optical Fiber Positioning System for Lamost

Optical System Research of Multi-Object Fiber Spectroscopic Survey Telescope

Optimized Optical System with a 1.65 M Wide-Field Corrector for the 6.5 M High-Performance MUltiplexed Survey Telescope

Scientific Projects of LAMOST