Atmosphyre: Modelling Atmospheric Chromatic Dispersion for Multi-Object Spectrographs

J. Stephan,R. Sánchez-Janssen

2024-07-19

Abstract:The wavelength dependent refraction of light in the atmosphere causes the chromatic dispersion of a target on the focal plane of an instrument. This is known as atmospheric dispersion, with one of the consequences being wavelength dependent flux losses which are difficult to minimise, requiring analysis in both instrument design and operations. We present Atmosphyre, a novel python package developed to characterise the impact of atmospheric dispersion on a spectrograph, with a focus on fibre multi-object spectrographs (MOS) which will be at the forefront of ground-based astronomy for the next few decades. We show example simulations and provide recommendations for minimising fibre MOS flux losses. We conclude that the guiding wavelength should typically be bluer than the observing band mid-wavelength, around 25-45% of the way through the band. The aperture should be centred on this wavelength's location on the focal plane. This wavelength/position remains constant for all reasonable declinations and target hour angles. We also present an application of the package to MOSAIC, the ELT's multi-object spectrograph. We find that differential losses greater than 10% are unavoidable for 1h observations that are a) after a local hour angle of 2.5h, or b) at declinations below -60 degrees and above 10 degrees. We identify that the introduction of an atmospheric dispersion corrector (ADC) would result in the significant reduction of spectral distortions, a gain in survey speed for many observations, and enable the implementation of wider visible observing bands; as a result, there has been a proposal to adopt ADCs at a positioner level for MOSAIC. Future work includes adding field differential refraction to Atmosphyre, important for future wide-field multi-object spectrograph projects such as the proposed WST.

Instrumentation and Methods for Astrophysics

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the impact of atmospheric dispersion on multi - object spectrometers (MOS) observations. Specifically, light refraction in the atmosphere causes light of different wavelengths to disperse on the focal plane of the instrument, resulting in flux loss and spectral distortion. These problems require special attention when designing and operating multi - object spectrometers, especially in ground - based astronomical observations.

### Specific manifestations of the problem

1. **Wavelength - dependent flux loss**: Due to atmospheric dispersion, different wavelength components of the target object will be dispersed on the focal plane, causing some light to be unable to enter the slit or fiber of the spectrometer, thus reducing the flux at specific wavelengths.
2. **Spectral distortion**: Dispersion will also introduce distortion of the spectral shape, affecting the accuracy of scientific results.
3. **Reduced observation efficiency**: In order to reduce these losses, a longer exposure time may be required, which will reduce the observation efficiency and increase the observation cost.

### Main contributions of the paper

To solve the above problems, the author has developed a Python software package named Atmosphyre for simulating and quantifying the impact of atmospheric dispersion on spectrometers, especially for fiber - multi - object spectrometers (MOS). Through this tool, researchers can:

- **Optimize observation parameters**: Select the best guiding wavelength and aperture position to minimize flux loss and maximize the signal - to - noise ratio.
- **Evaluate design improvements**: For example, introduce an atmospheric dispersion corrector (ADC) to reduce spectral distortion, improve observation efficiency, and allow for wider visible - light - band observations.
- **Plan observation strategies**: Formulate the optimal observation plan according to different observation conditions (such as the position of celestial bodies, environmental conditions, etc.).

### Key findings

1. **Best guiding wavelength**: A wavelength bluer than the middle wavelength of the observation band should usually be selected as the guiding wavelength, approximately located at 25% - 45% of the observation bandwidth.
2. **Aperture position**: The aperture should be positioned at the location of the best guiding wavelength on the focal plane to maximize the flux.
3. **Inevitable losses**: For some extreme cases (such as when the local hour angle is greater than 2.5 hours or the declination is lower than - 60° and higher than 10°), even if optimization measures are taken, the flux loss will inevitably exceed 10%.
4. **Importance of ADC**: The introduction of ADC can significantly reduce spectral distortion, improve observation efficiency, and allow for the design of a wider visible - light - band.

In conclusion, this paper aims to help researchers better understand and deal with the impact of atmospheric dispersion on multi - object spectrometer observations by developing and applying the Atmosphyre tool, thereby improving the quality and efficiency of observations.