Abstract:Adaptive optic (AO) systems delivering high levels of wavefront correction are now common at observatories. One of the main limitations to image quality after wavefront correction comes from atmospheric refraction. An Atmospheric dispersion compensator (ADC) is employed to correct for atmospheric refraction. The correction is applied based on a look-up table consisting of dispersion values as a function of telescope elevation angle. The look-up table based correction of atmospheric dispersion results in imperfect compensation leading to the presence of residual dispersion in the point-spread function (PSF) and is insufficient when sub-milliarcsecond precision is required. The presence of residual dispersion can limit the achievable contrast while employing high-performance coronagraphs or can compromise high-precision astrometric measurements. In this paper, we present the first on-sky closed-loop correction of atmospheric dispersion by directly using science path images. The concept behind the measurement of dispersion utilizes the chromatic scaling of focal plane speckles. An adaptive speckle grid generated with a deformable mirror (DM) that has a sufficiently large number of actuators is used to accurately measure the residual dispersion and subsequently correct it by driving the ADC. We have demonstrated with the Subaru Coronagraphic Extreme AO (SCExAO) system on-sky closed-loop correction of residual dispersion to < 1 mas across H-band. This work will aid in the direct detection of habitable exoplanets with upcoming extremely large telescopes (ELTs) and also provide a diagnostic tool to test the performance of instruments which require sub-milliarcsecond correction.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the impact of atmospheric dispersion on image quality in high - contrast imaging and astrometry. In particular, when sub - milli - arcsecond precision is required, the atmospheric dispersion compensation method based on look - up tables cannot completely eliminate the residual dispersion problem. Specifically, the paper focuses on how to more accurately measure and correct atmospheric dispersion in a closed - loop by directly using scientific - path images, in order to improve the performance of high - contrast coronagraphs and the accuracy of high - precision astrometry. ### Background of the Paper and Problem Description 1. **The Influence of Atmospheric Turbulence**: - Atmospheric turbulence is one of the main limiting factors for ground - based telescopes to detect exoplanets. It limits the contrast of high - contrast imagers and the ability of accurate astrometry. - Besides turbulence, the Earth's atmosphere also causes other wave - front errors. One of them is atmospheric refraction, that is, the dispersive change of the air refractive index, which is manifested as the elongation of the point spread function (PSF). 2. **Limitations of Existing Solutions**: - Currently, adaptive optics (AO) systems correct atmospheric refraction through atmospheric dispersion compensators (ADC). These compensations are calculated based on atmospheric dispersion models, using standard input parameters (temperature, pressure, and humidity). - However, the dispersion correction method based on look - up tables has the problem of imperfect compensation, resulting in residual dispersion in scientific - path images, which is particularly significant in applications requiring sub - milli - arcsecond precision. 3. **The Influence of Residual Dispersion**: - Residual atmospheric dispersion not only affects the Strehl ratio of the PSF but also limits the astrometric accuracy of the target. - For coronagraphs with a low inner working angle (IWA), residual dispersion will cause starlight to leak around the coronagraph focal - plane mask, reducing the contrast of the imager. ### The Method Proposed in the Paper The paper proposes a new method to more accurately measure and correct residual atmospheric dispersion in a closed - loop by directly using the dispersion measurement technique in scientific - path images. The specific steps are as follows: 1. **Dispersion Measurement**: - Use the dispersion - scaling characteristics of focal - plane speckles to measure residual dispersion. In the absence of dispersion, speckles radiate from the PSF core; in the presence of dispersion, speckles are far from the PSF core and the radiation center also moves away. - Determine the existence of residual dispersion by measuring the position of the radiation center. 2. **Closed - Loop Correction**: - Use a simple integral controller (equivalent to the case where there is no proportional or differential gain in a PID controller) to drive the ADC to achieve closed - loop correction. - The speed of the control loop is determined by the ADC prism rotation speed of the AO system, usually about 4 seconds. ### Experimental Results The paper shows the experimental results using the high - contrast imager SCExAO of the Subaru telescope, proving the effectiveness of this method: - **Closed - Loop Correction**: Through closed - loop control, the residual dispersion can be corrected to the sub - milli - arcsecond level, significantly improving the imaging quality and astrometric accuracy. - **Open - Loop Measurement**: Analyzed the ADC correction performance based on look - up tables, found the variation trend of residual dispersion under different telescope heights and atmospheric conditions, and estimated the dispersion caused by internal optics. ### Conclusion The closed - loop atmospheric dispersion correction method proposed in the paper can effectively solve the imperfect compensation problem existing in the existing methods and improve the performance of high - contrast imaging and high - precision astrometry. This technology is of great significance for the direct detection of habitable exoplanets by future extremely large telescopes (ELTs).

On-sky closed loop correction of atmospheric dispersion for high-contrast coronagraphy and astrometry

An Advanced Atmospheric Dispersion Corrector: The Magellan Visible AO Camera

The development of an optical design tool for atmospheric dispersion correction

The future looks dark: improving high contrast imaging with hyper-parameter optimization for data-driven predictive wavefront control

Laboratory and On-Sky Validation of the Shaped Pupil Coronagraph's Sensitivity to Low-Order Aberrations With Active Wavefront Control

Correction of Non–Common-Path Error for Extreme Adaptive Optics

Fast focal plane wavefront sensing on ground-based telescopes

The impact of atmospheric dispersion in the performance of high-resolution spectrographs

Adaptive optics for high-resolution imaging

SCExAO, a testbed for developing high-contrast imaging technologies for ELTs

Coronagraphic phase diversity: performance study and laboratory demonstration

Atmosphyre: Modelling Atmospheric Chromatic Dispersion for Multi-Object Spectrographs

Laboratory Demonstration of Real-Time Focal Plane Wavefront Control of Residual Atmospheric Speckles

On-sky, real-time optical gain calibration on MagAO-X using incoherent speckles

Efficient Wavefront Sensing for Space-Based Adaptive Optics

Modeling astronomical adaptive optics performance with temporally filtered Wiener reconstruction of slope data

Data-driven Subspace Predictive Control of Adaptive Optics for High-Contrast Imaging

Quantification of the expected residual dispersion of the MICADO Near-IR imaging instrument

Absorption Line Shape of a One-Dimensional Bose Gas

Deformable mirror-based pupil chopping for exoplanet imaging and adaptive optics

First Experimental Results of the Fast Atmospheric Self-coherent Camera Technique on the Santa cruz Extreme Adaptive optics Laboratory Testbed: Demonstration of High Speed Focal Plane Wavefront Control of Residual Atmospheric Speckles