Abstract:In the telescope observation, the position of fiber will highly influence the spectra efficient input in the fiber to the spectrograph. When the fibers were back illuminated on the spectra end, they would export light on the positioner end, so the CCD cameras could capture the photo of fiber tip position covered the focal plane, calculates the precise position information by light centroid method and feeds back to control system. A set of fiber back illuminated system was developed which combined to the low revolution spectro instruments in LAMOST. It could provide uniform light output to the fibers, meet the requirements for the CCD camera measurement. The paper was introduced the back illuminated system design and different test for the light resource. After optimization, the effect illuminated system could compare with the integrating sphere, meet the conditions of fiber position measurement.Using parallel controlled fiber positioner as the spectroscopic receiver is an efficiency observation system for spectra survey, has been used in LAMOST recently, and will be proposed in CFHT and rebuilt telescope Mayall. In the telescope observation, the position of fiber will highly influence the spectra efficient input in the fiber to the spectrograph. When the fibers were back illuminated on the spectra end, they would export light on the positioner end, so the CCD cameras could capture the photo of fiber tip position covered the focal plane, calculates the precise position information by light centroid method and feeds back to control system. After many years on these research, the back illuminated fiber measurement was the best method to acquire the precision position of fibers. In LAMOST, a set of fiber back illuminated system was developed which combined to the low revolution spectro instruments in LAMOST. It could provide uniform light output to the fibers, meet the requirements for the CCD camera measurement and was controlled by high-level observation system which could shut down during the telescope observation. The paper was introduced the back illuminated system design and different test for the light resource. After optimization, the effect illuminated system could compare the integrating sphere, meet the conditions of fiber position measurement.

Optical System Research of Multi-Object Fiber Spectroscopic Survey Telescope

Optical system for extremely large spectroscopic survey telescope

Optimized Optical System with a 1.65 M Wide-Field Corrector for the 6.5 M High-Performance MUltiplexed Survey Telescope

Optical design of a multi-object fiber-fed spectrograph system for Southern Spectroscopic Survey Telescope

Concept Design of an Extremely Large Spectroscopic Survey Telescope

The Large Sky Area Multi-Object Fibre Spectroscopy Telescope (Lamost) Project

Back-illuminate Fiber System Research for Multi-Object Fiber Spectroscopic Telescope

A Suggested 12-M Telescope Optical System Configuration for China

New telescope designs suitable for massively-multiplexed spectroscopy

Accuracy Research for Survey Telescope Fiber Position Measurement

Optical System Design of Telescope Based on Mixed Modulation Diffractive Lens

A New Configuration for Spectral Survey Telescope

Research for Fiber Optic Telescope Using Large Cross-Section Image Transmitting Bundle (Lcsitb)

Conceptual Design of the Optical System of the 6.5m Wide Field Multiplexed Survey Telescope with Excellent Image Quality

Study of a Large Optical/Infrared Telescope Scheme.

The Optical Performance of LAMOST Telescope

Study of Wide Field Imaging Spectrometer Based on Fery Prism with Optical Fiber Array

Research of Fiber Position Measurement by Multi Ccd Cameras

Optical System Design with High Resolution and Large Field of View for the Remote Sensor

The Fiber View Metrology System Design for Spectral Survey Telescope