Abstract:Extended Floating Gate Field Effect Transistors (EGFETs) are CMOS-compatible floating gate devices capable of detecting charges on their sensing area by the relative shifts in current-voltage (I-V) characteristics. The I-V shifts are generally computed by measuring the EGFET parameters in the strong inversion region of operation. This could lead to errors in estimating the device sensitivity because the simple I-V model ignores the mobility degradation and series resistance effects in EGFETs. Our goal is to model these parasitic effects and present methods to extract the key device parameters. We derive an analytical I-V model for EGFETs in the linear region of transistor operation, accounting for both the mobility degradation and series resistance effects. Based on the analytical model, three methods are presented to estimate the key parameters, namely the threshold voltage, series resistance, surface roughness parameter, low-field mobility, and effective mobility from the I-V characteristics, gate transconductance, and drain conductance. The peak transconductance method is used as a benchmark for comparing the extracted threshold voltages. Silicon-based EGFET devices are fabricated, and their I-V characteristics are measured with deionized water and three polyelectrolytes. From the I-V data, the parameter extraction methods are used to compute the values of the key parameters, and the suitability of each method is discussed. The gate transconductance methods show good agreement between the values for the key parameters, while the drain transconductance method gives lower values of the key parameters. There is scope to improve the presented methods by incorporating the effects of substrate bias and asymmetric series resistance for new extended-gate device architectures, including solution-based organic field-effect transistors.

A New Extraction Method of Poly-Si Tft Model Parameters in the Leakage Region

An empirical model of leakage current in poly-silicon TFTs

A Compact Model for Polysilicon TFTs Leakage Current Including the Poole–Frenkel Effect

A New Method to Extract Gate Bias-Dependent Parasitic Resistances in GaAs Phemts

A Parameter Extraction Method Based on Particle Swarm Optimization

Research and Development of Leakage Current Modeling for Polycrystalline Silicon Transistors

Parameter Extraction Of Bsim Based On S(3)Theory

A Separable Nonlinear Least Squares Approach for Double-Diode Photovoltaic Model Parameter Extraction

An Accurate Parameter Extraction Method for RF LDMOSFET Small-Signal Model

A new small-signal parameter extraction approach for SOI MOSFET

Extraction of Process Variation Parameters in FinFET Technology Based on Compact Modeling and Characterization

Extraction of Single Diode Model Parameters of Solar Cells and PV Modules by Combining an Intelligent Optimization Algorithm with Simplified Explicit Equation Based on Lambert W Function

Accurate and Fast Estimation of Junction Band-to-Band Leakage in Nanometer-Scale MOSFET

A BSIM SOI Model Parameter Extraction Method for SOI MOSFETs Based on PSO

Parameter extraction of Extended Floating Gate Field Effect Transistors (EGFETs): Estimating the threshold voltage, series resistance, and mobility degradation from I-V measurements

Modeling of the Band-to-Band Tunneling Current in Polysilicon TFT's Leakage Region

Full-Chip Leakage Analysis for 65 Nm Cmos Technology and Beyond

Compact Model Parameter Extraction via Derivative-Free Optimization

An Analytical Subthreshold Model for Polysilicon Thin-Film Transistors by a Quasi-Two-Dimensional Solution

Separable Nonlinear Least Squares Search of Parameter Values in Photovoltaic Models

Parameter extraction of polymer electrolyte membrane fuel cell based on quasi-dynamic model and periphery signals