Abstract:S-band fiber lasers, one type of ytterbium doped fiber lasers(YDFLs) which emitting in the spectral region of 1010 nm similar to 1050 nm, have drawn more and more attention especially after the proposition of tandem pump fiber lasers. The S-band laser plays an important role as the pump in a tandem pumping scheme. However, high power S-band laser output is quite difficult because of severe re-absorption. Therefore, the optical properties of S-band fiber lasers are studied and methods to achieve high power S-band laser output are presented. An S-band laser emission model based on gain comparison is built for analyzing the mechanism of laser oscillation and amplification. The model is composed of rate equations and gain comparison of several wavelengths in ASE spectrum. The gain differential between laser wavelength and ASE peak wavelength is compared to the additional gain imposed by cavity mirrors in an oscillator or the seed in an amplifier. The comparison results help in concluding the feasibility of S-band laser emission. Based on the model, the influences of fiber properties (including core doping level, core -clad ratio, and fiber length), pump power and laser power on the operation of S-band fiber lasers or amplifiers are researched. The analysis shows that fibers with lower doping level, larger core-clad ratio and shorter length, seed with higher power, are more helpful in realizing high power S-band laser output. Also, the profile of oscillator is found more suitable in building high power S-band lasers than that of amplifier.

High Power L-Band Erbium-Doped Fiber Laser Pumped by A C-Band Superfluorescent Source

301 W Narrow-Linewidth In-Band Pumped Er:Yb Co-Doped Fiber Amplifier at 1585 Nm and Related Modeling for Dynamics Study and Optimization

Wavelength and Power Dependence of Injected C-band Laser on Pump Conversion Efficiency of L-band EDFA

Optimally Gain-Flattened and Dispersion-Managed C + L-band Hybrid Amplifier Using a Single-Wavelength Pump Laser

L-Band Edfa Efficiency Enhancement And Dynamic Range Extension By C-Band Laser Injection

Highly efficient Er/Yb-codoped fiber amplifier with an Yb-band fiber Bragg grating.

A New Three-stage Structure for a High-performance L-band Erbium-doped Superfluorescent Fiber Source

High-Stability and Broad-Band Erbium-Doped Superfluorescent Fiber Source

Toward an ultra-broadband emission source based on the bismuth and erbium co-doped optical fiber and a single 830nm laser diode pump.

Towards a new strategy for dental health.

High-efficiency and high-power single-frequency fiber laser at 1.6 um based on cascaded energy-transfer pumping

Performance Enhancement of C + L Band EDFA by Recycling the Residual Pump Lasers

414.9 W In-Band Pumped Er/Yb Co-Doped Fiber Amplifier Seeded by a Random Fiber Laser.

High-power all-fiber superfluorescent source with fused angle-polished side-pumping configuration.

High Pump Conversion Efficiency and Broad L-Band ASE Sourceby Using Sagnac Feedback Loop

High-slope-efficiency 206 Μm Ho: YLF Laser In-Band Pumped by a Fiber-Coupled Broadband Diode

Gain-Switched Er-Doped Fluoride Fiber Laser at ~3.75 μm

Optical Properties of High Power S-Band Fiber Oscillators and Amplifiers

47-Wavelength Flat Erbium-Doped Fiber Ring Laser with Reduced Operation Power

Er3+/Yb3+ Co-Doped Fluorotellurite Glass Fiber with Broadband Luminescence

100nm Widely Tunable Er-doped Fiber Laser