Abstract:BaCe0.5Zr0.3Y0.2O3–δ (BCZY), regarded as one of the most promising proton–conducting electrolytes, often experiences difficulty because of its high sintering temperature. Here, a B–site doped BaCe0.56Zr0.2Ni0.04Y0.2O3–δ (BCZNY) electrolytes were fabricated to address this drawback. The impact of Ni addition on sintering and electrical properties was examined. By adding Ni to the B–site of BCZY, a substantial decrease in the sintering temperature was achieved, i.e., from 1600 °C (for BCZY) to 1300 °C (for BCZNY). A conductivity of 0.05 S cm−1 at 700 °C was observed for BCZNY electrolyte in a moist nitrogen environment. In addition, SrFe0.8Mo0.2O3–δ (SFM) is utilized as a symmetrical electrode material due to its high ionic and electronic conductivity. SFM electrode was synthesized via combustion process and exhibited suitable chemical and thermal compatibility with BCZY and BCZNY electrolytes up to 1100 °C. A single–phase cubic structure along with the surface morphology of electrolyte–supported symmetrical cells was confirmed by X–ray diffraction and scanning electron microscopy. Electrochemical impedance spectroscopy was conducted to identify the area–specific polarization resistance (ASR). The lowest ASR values of 0.037, 0.081, and 0.327 Ω cm2 at 800, 700, and 600 °C in humidified hydrogen were obtained in SFM-BCZNY composite electrode. The symmetrical cell achieved a peak power density of 254 m W cm−2 (cell configuration; SFM-BCZNY | BCZNY | SFM-BCZNY) at 800 °C. The fuel cell devices showed long–term stability of the fuel cell device for 100 h at 700 °C under a current of 120 mA cm−2. Considering the presented results, the as-prepared BCZNY is a promising protonic electrolyte for IT-SOFCs.

Proton-conducting Fuel Cells Operating on Hydrogen, Ammonia and Hydrazine at Intermediate Temperatures

An ammonia fuelled SOFC with a BaCe0.9Nd0.1O3-δ thin electrolyte prepared with a suspension spray

Stable, easily sintered BaCe0.5Zr0.3Y0.16Zn0.04O3−δ electrolyte-based protonic ceramic membrane fuel cells with Ba0.5Sr0.5Zn0.2Fe0.8O3−δ perovskite cathode

Performance improvement of a micro borohydride fuel cell operating at ambient conditions

Fabrication of BaZr0.1Ce0.7Y0.2O3 – Δ ‐based Proton‐Conducting Solid Oxide Fuel Cells Co‐Fired at 1,150 °C

Proton‐Conducting Fuel Cells: A New Pd Doped Proton Conducting Perovskite Oxide with Multiple Functionalities for Efficient and Stable Power Generation from Ammonia at Reduced Temperatures (adv. Energy Mater. 19/2021)

A Performance Study of Solid Oxide Fuel Cells with BaZr0.1Ce0.7Y0.2O3–δ Electrolyte Developed by Spray‐Modified Pressing Method

Evaluation of BaZr0.1Ce0.7Y0.2O3−δ-based Proton-Conducting Solid Oxide Fuel Cells Fabricated by a One-Step Co-Firing Process

Fabrication and performance of a proton-conducting solid oxide fuel cell based on a thin BaZr0.8Y0.2O3-δ electrolyte membrane

Ceramic fuel cells using novel proton-conducting BaCe0.5Zr0.3Y0.1Yb0.05Zn0.05O3-δ electrolyte

Intermediate-to-low temperature protonic ceramic membrane fuel cells with Ba0.5Sr0.5Co0.8Fe0.2O3-δ–BaZr0.1Ce0.7Y0.2O3-δ composite cathode

Comparative study on the performance of a SDC-based SOFC fueled by ammonia and hydrogen

A new stable BaCeO3-based proton conductor for intermediate-temperature solid oxide fuel cells

A New Pd Doped Proton Conducting Perovskite Oxide with Multiple Functionalities for Efficient and Stable Power Generation from Ammonia at Reduced Temperatures

A stable BaCeO3-based proton conductor for intermediate-temperature solid oxide fuel cells

A New Stable BaCeO3‐Based Proton Conductor for Intermediate‐Temperature Solid Oxide Fuel Cells.

Insights on the electrochemical performance of a molten proton conductor fuel cell with internal methanol reformer

A High-Performing Proton-Conducting Solid Oxide Fuel Cell with Layered Perovskite Cathode in Intermediate Temperatures

An anode‐supported tubular proton conductor fuel cell with an inner ceramic ammonia cracking component

Design of efficient and durable symmetrical protonic ceramic fuel cells at intermediate temperatures via B-site doping of Ni in BaCe0.56Zr0.2Ni0.04Y0.2O3–δ

Readily processed protonic ceramic fuel cells with high performance at low temperatures