Abstract:Organic light emitting diodes (OLEDs) have been extensively researched for applications in solid state lighting and emissive flat panel displays. Along with improved device lifetime and efficiency, significant cost reductions are required for OLED technology to find widespread use. The transparent conducting oxide (TCO) anode, specifically indium tin oxide (ITO), is a significant contributor to device cost. Low cost alternatives to ITO such as aluminum doped zinc oxide (AZO) are therefore of technological interest. Basic bilayer OLEDs employing AZO surface modified with approximately 3 nm of molybdenum sub-oxide (MoO x ) anodes (AZO/3 nm MoO x ) exhibited peak luminance (L), power efficiency (PE), luminous efficiency (LE), and external quantum efficiency (EQE) of 8959 Cd/m2, 3.3 lm/W, 4.1 Cd/A, and 1.4%, respectively. The corresponding values for devices with standard ITO anodes were 8080 Cd/m2, 2.9 lm/W, 3.1 Cd/A, and 1.0%, respectively. In all devices studied, tris(8-hydroxyquinolinato)aluminum (AlQ3) was the emissive and electron-transport layer, and N,N'-bis(naphthalene-1-yl)– N,N'-bis(phenyl)-benzidine (NPB) was the hole transport layer. Ultraviolet photoelectron spectroscopy (UPS) measurements revealed an effective workfunction of 4.8 eV for the composite AZO/MoO x anode, compared to 4.6 eV for ITO. Further, UPS of the MoO x revealed the presence of a defect band below the fermi level, which is due to the filling of Mo 4d states, and indicates the presence of Mo4+, Mo5+ and compensating oxygen vacancies. These donor-like gap states in MoO x lower the hole injection barrier from AZO, which in turn reduces the turn-on voltage compared to as-deposited AZO (i.e., neat AZO). The improved device performance compared to ITO is ascribed to better charge balance.

Low Driving Voltage in Organic Light-Emitting Diodes with Npb/Moo3/Npb As A Hole Transport Layer

Low Operating-Voltage and High Power-Efficiency OLED Employing MoO3-doped CuPc As Hole Injection Layer

Electron Blocking and Hole Injection: the Role of N,N′-Bis(naphthalen-1-y)-N,N′-bis(phenyl)benzidine in Organic Light-Emitting Devices

Improved Performance of Organic Light-Emitting Diodes with MgF 2 As the Anode Buffer Layer

Low-voltage Top-Emitting Organic Light-Emitting Devices with an Organic Double-Heterojunction Structure

Optimal thickness of hole transport layer in doped OLEDs

Organic light-emitting diodes with varying thickness of bathocuproine layer

P-113: Novel Structure Organic Light-Emitting Diodes with High Performance

Material design of hole transport materials capable of thick-film formation in organic light emitting diodes

Bipolar TADF Interlayer for High Performance Hybrid WOLEDs with an Ultrathin Non-Doped Emissive Layer Architecture

Organic light-emitting devices with a 2-(4-biphenyl)-5-(4-butylphenyl)-1,3,4-oxadiazole layer between the α-naphtylphenyliphenyl diamine and 8-hydroxyquinoline aluminum

P-113: Society for Information Display: Novel Structure Organic Light-emitting Diodes With High Performance

Electro-optical performance of molybdenum oxide modified aluminum doped zinc oxide anodes in organic light emitting diodes: A comparison to indium tin oxide

Efficient Blue Organic Light-Emitting Diodes with Simple Structure Based on N, N '-Bis (1-Naphthyl)-n, N '-Biphenyl-1, 1 '-Biphenyl-4,4 '-Diamine

Recovery of electroluminescence in electron-only organic light-emitting diode by inserting a thin MoO3 layer at Bphen/NPB interface

Hybrid Organic Light Emitting Device with Silicon-Rich Oxide As Hole Transporting Layer

Efficient Organic Light-Emitting Diode Using Lithium Tetra(8-Hydroxy-Quinolinato) Boron As the Electron Injection Layer

Organic electrophosphorescent devices with mixed hole transport material as emission layer

Promoted Hole Transport Capability by Improving Lateral Current Spreading for High‐Efficiency Quantum Dot Light‐Emitting Diodes

Efficient Single-Active-Layer Organic Light-Emitting Diodes With Fluoropolymer Buffer Layers

Single-layer Small Molecular Organic Light Emitting Diodes Without Hole Transport Layer