Abstract:In order to achieve desired mechanical properties of alloys by manipulating grain boundaries (GBs) via solute decoration, it is of great significance to understand the underlying mechanisms of microstructural evolution and plastic deformation. In this work, nanocrystalline (NC) Cu-W alloyed films with W concentrations spanning from 0 to 40 at% were prepared by using magnetron sputtering. Thermal stability (within the temperature range of 200 °C-600 °C) and hardness of the films were investigated by using the x-ray diffraction, transmission electron microscope (TEM) and nanoindentation, respectively. The NC pure Cu film exhibited substantial grain growth upon all annealing temperatures. The Cu-W alloyed films, however, displayed distinct microstructural evolution that depended not only on the W concentration but also on the annealing temperature. At a low temperature of 200 °C, all the Cu-W alloyed films were highly stable, with unconspicuous change in grain sizes. At high temperatures of 400 °C and 600 °C, the microstructural evolution was greatly controlled by the W concentrations. The Cu-W films with low W concentration manifested abnormal grain growth (AGG), while the ones with high W concentrations showed phase separation. TEM observations unveiled that the AGG in the Cu-W alloyed thin films was rationalized by GB migration. Nanoindentation results showed that, although the hardness of both the as-deposited and annealed Cu-W alloyed thin films monotonically increased with W concentrations, a transition from annealing hardening to annealing softening was interestingly observed at the critical W addition of ∼25 at%. It was further revealed that an enhanced GB segregation associated with detwinning was responsible for the annealing hardening, while a reduced solid solution hardening for the annealing softening.

Template-induced Formation of Α-W and Size-Dependent Properties of Tungsten Thin Films

COHERENT GROWTH OF Α-W FILM ON Si WAFER AND ITS THICKNESS DEPENDENT MECHANICAL AND ELECTRICAL PROPERTIES

Insights into the Nucleation, Grain Growth and Phase Transformation Behaviours of Sputtered Metastable Β-W Films

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

Structural and Tribological Properties of Tungsten Oxide Thin Film on a Silicon Substrate

The Surface Mapping and Crystal Orientation of Body-Centered Cubic Thin Metal Tungsten Films of Different Thickness

Study of Tungsten Deposited on Amorphous Si, Si (111) and Sio2 Using Direct-Current Magnetron Sputtering

Fabrication and Optical Performance of Mo1-xWxS2 Monolayer with Different Composition Ranges Via One-Step Chemical Vapor Deposition Approach

Microstructure and Mechanical Properties of Nanocrystalline Tungsten Thin Films

Electrical and Mechanical Characterization of Chemical Vapor Deposition of Tungsten on Sputter-Deposited TiN Layers

The Characterization of Superconducting Tungsten Thin Films Deposited by DC Magnetron Sputtering

Phase composition of sputter deposited tungsten thin films

Phase Control and Young's Modulus of Tungsten Thin Film Prepared by Dual Ion Beam Sputtering Deposition

Microstructures and Nano Mechanical Properties of the Metal Tungsten Film

Composition, Residual Stress, and Structural Properties of Thin Tungsten Nitride Films Deposited by Reactive Magnetron Sputtering

Epitaxy of Tungsten on Polycrystalline Molybdenum Using Chemical Vapor Transport Deposition Technology

An Experimental Study of Chemical Vapour Deposition of Tungsten on Ti/TiN Adhesion Bilayers: Mechanical Properties

Evolution Mechanism of Nanocrystalline Tungsten-Carbon and Effects on Tungsten Implanted Amorphous Hydrogenated Carbon

Crystalline Orientation and Surface Structure Anisotropy of Annealed Thin Tungsten Films

Effect of Substrate Constraint on Stress-Induced Deformation Mechanism of Tungsten Thin Film

The Nano Tungsten Thin Film and its Contacting Property with Aluminium Electrodes