Abstract:In 2000, Tarascon et al. revealed the reversible conversion reaction based on the size effect of nanoparticles in metal oxide system, whose theoretical capacity is up to 1000mAh·g-1[1]. However, except large capacity, metal oxide as anode material has its own drawbacks. For example, the electronic conductivity of metal oxides is usually poor, and some of them will form alloy with lithium during the reaction process which cause huge volume change. In order to overcome these obstacles, lots of methods have been presented. Mainly includes the following ways: 1) Fabricating thin film materials, 2) Synthesizing nanostructured materials, 3) Doping or preparing composite materials. Further works showed the doping is effective and convenient in thin film fabrication, and the composite thin films usually obtained better performance than the single system. NiO-NiSe nanocomposite films were fabricated by plused laser deposition. Charge/discharge measurements, cyclic voltammograms and AC impedance tests were used to investigate cyclic performance and electrochemical properties of the materials. X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED) were employed to detect the structure, morphology and composition of these nanocomposite films in certain electrochemical states. In addition, the electrochemical reaction mechanism of the films versus Li were discussed. The results indicated that: Compared with the single system NiO or NiSe, the transfer resistance of lithium ion in NiO-NiSe nanocomposite thin film is smaller. NiO-NiSe electrode also exhibited a little higher discharge-charge capacity and better cycle performance. After 50 cycles, a reversible capacity of 495mAh.g-1 can still be obtained. NiO-NiSe nanocomposite film also has good rate capability and is more suitable for lithium-ion battery anode material. The electrochemical reaction mechanism investigation showed that NiO and NiSe in the electrode reacted with lithium separately and could be reversibly reproduced.

Nanocrystalline tin oxides and nickel oxide film anodes for Li-ion batteries

Crystalline SnO2 @ Amorphous TiO2 Core-Shell Nanostructures for High-Performance Lithium Ion Batteries

Synthesis of Uniform Polycrystalline Tin Dioxide Nanofibers and Electrochemical Application in Lithium-Ion Batteries

A Nanocrystalline Nio Thin-Film Electrode Prepared by Pulsed Laser Ablation for Li-Ion Batteries

Nanocrystalline NiO thin film anode with MgO coating for Li-ion batteries

Nickel oxide nanocrystals as a lithium-ion battery anode: structure-performance relationship

Facile Synthesis of Ultrasmall Tin Oxide Nanoparticles Embedded in Carbon As High-Performance Anode for Lithium-Ion Batteries

Direct Growth of SnO2 Nanorod Array Electrodes for Lithium-Ion Batteries

Nanocrystalline ZnFe[sub 2]O[sub 4] and Ag-Doped ZnFe[sub 2]O[sub 4] Films Used as New Anode Materials for Li-Ion Batteries

ZnO Nanoneedle Arrays Directly Grown on Bulk Nickel Substrate for Li Ion Battery Electrodes with Improved Performance

Research on the Preparation and Electrochemical Properties of NiO Anode Films

Nanostructured Nio Electrode for High Rate Li-Ion Batteries

Characterization of SnO2 Nanowires As an Anode Material for Li-ion Batteries

A nanocrystalline Co3O4 thin film electrode for Li-ion batteries

Composite NiO-NiSe Thin Film Fabricated by Pulse Laser Deposition As a New Anode of Lithium Ion Batteries

Polycrystalline SnO2 nanowires coated with amorphous carbon nanotube as anode material for lithium ion batteries

Stable anodes for lithium-ion batteries based on tin-containing silicon oxycarbonitride ceramic nanocomposites

A facile fabrication of nanometer tetragonal rod–like SnO2 as anode for lithium ion batteries

Microsized Sn supported by NiTi alloy as a high-performance film anode for Li-ion batteries

Fabrication and characterization of tin nanorod electrodes for lithium ion rechargeable batteries

Carbon-Coated Tin-Titanate derived SnO2/TiO2 nanowires as High-Performance anode for Lithium-Ion batteries