Abstract:The morphology-controlled synthesis of SnO2 hollow/nanoporous nanostructures (nanotubes, urchin-like morphologies and nanospheres) was achieved via a template-engaged replacement reaction at a mild temperature (lower than 80 degrees C). The formation mechanism of hollow interior and nanoporous walls for the obtained SnO2 nanostructures (SnO2 nanotubes were used as an example) was investigated based on TEM and HRTEM observations during different reaction stages. It is found that bridge voids firstly form at the MnO2/SnO2 interface, followed by the inward development of voids before the MnO2 core is completely consumed. Two types of short-circuited galvanic cells, MnO2/Mn2+ rSnO(2)/Sn2+ and concentration cell-SnO2/Sn2+ (interior) rSnO(2)/Sn2+ (exterior), are probably responsible for the formation of SnO2 nanotubes and outward growth of SnO2 along MnO2. Moreover, the calculation result of the outer diameter of SnO2 nanotubes is in good agreement with the observation results by SEM and TEM. When evaluated as anodes for lithium ion batteries (LIBs), the three SnO2 nanostructures exhibit superior rate capability and cycling performance. Especially, SnO2 nanotubes present the best rate capability: specific capacities of above 800 mA h g(-1) at 200 mA g(-1) and about 500 mA h g(-1) at 4000 mA g(-1) were achieved, respectively. Importantly, the 1D morphology of SnO2 nanotubes can be well preserved after prolonged cycling at a relatively high current density, indicating good structural stability of the resulting nanotubes during the Li+ insertion/extraction process. These results indicate that the obtained SnO2 hollow/nanoporous nanostructures would be promising anode materials for next-generation LIBs.

A facile fabrication of nanometer tetragonal rod–like SnO2 as anode for lithium ion batteries

Two-Dimensional SnSe2/CNTs Hybrid Nanostructures As Anode Materials for High-Performance Lithium-Ion Batteries

Facile Preparation of One-Dimensional Hollow Tin Dioxide@carbon Nanocomposite for Lithium-Ion Battery Anode

Honeycomb-inspired Design of Ultrafine SnO2@C Nanospheres Embedded in Carbon Film As Anode Materials for High Performance Lithium- and Sodium-Ion Battery

Monodisperse yolk-shell SnO2/C submicron spheres fabricated through a facile process as an anode material for lithium-ion batteries

In-situ synthesized carbon-coated Sn–SnO2 nanoparticles embedded in carbon nanotubes on Cu foam as anode material for lithium-ion batteries

Monodispersed SnO2 Nanospheres Embedded in Framework of Graphene and Porous Carbon As Anode for Lithium Ion Batteries

Nanocomposite SnO2–Se Thin Film As Anode Material for Lithium-Ion Batteries

Characterization of SnO2 Nanowires As an Anode Material for Li-ion Batteries

A simple fabrication of porous carbon@tin dioxide as anode material for achieving lithium-ion batteries with high performance

The self-assembly of porous microspheres of tin dioxide octahedral nanoparticles for high performance lithium ion battery anode materials

In situ synthesized SnO2 nanorod/reduced graphene oxide low-dimensional structure for enhanced lithium storage.

Hydrothermal Synthesis of Hollow SnO2 Spheres with Excellent Electrochemical Performance for Anodes in Lithium Ion Batteries

Synthesis of SnO2/Sn Hybrid Hollow Spheres As High Performance Anode Materials for Lithium Ion Battery

Lithium storage performance of Sn-MOF-derived SnO2 nanospheres as anode material

Self-assembled 3-D flower-shaped SnO2 nanostructures with improved electrochemical performance for lithium storage

Large-scale low temperature fabrication of SnO2 hollow/nanoporous nanostructures: the template-engaged replacement reaction mechanism and high-rate lithium storage.

Facile low-temperature synthesis of a hierarchical Sn-SnO2/CNT/rGO composite for anode material in lithium-ion batteries

Facile Preparation of Porous Mn2SnO4/Sn/C Composite Cubes As High Performance Anode Material for Lithium-Ion Batteries

In Situ Synthesis of SnO2nanoparticles Encapsulated in Micro/mesoporous Carbon Foam As a High-Performance Anode Material for Lithium Ion Batteries

One-pot synthesis of TiO2-decorated SnSe/ZnS as a novel anode material with promoted storage capacity and cyclability in lithium-ion batteries