Abstract:A hydrothermal method was employed to synthesize the precursor of nano-zirconium carbide, which was subsequently heat treated at high temperatures under vacuum to obtain finely dispersed nanometer-sized zirconium carbide powder through a carbothermic reduction reaction. Scanning Electron Microscopy (SEM) was utilized to examine the microstructure of the precursors obtained under different hydrothermal conditions and carbon contents. The effects of different heat treatment temperatures on the microstructure of the products were analyzed. Transmission Electron Microscopy (TEM) confirmed the boundary coating structure of the hydrothermal precursor and provided insights into the phase structure of the nanometer-sized zirconium carbide. The reaction mechanism and temperature involved in the carbothermic reaction process were determined through calculations. Furthermore, the energy, phase and microstructure of the reaction were investigated using Thermogravimetric Analysis (TG-DSC) and X-ray Diffraction (XRD) at different temperatures. The obtained results revealed that the zirconium carbide precursor was synthesized via the hydrothermal method exhibited a coreshell structure with a boundary coating, which not only ensured uniform contact between C and ZrO2 particles but also facilitated the formation of zirconium carbide. The results show that the most suitable process parameters are Zr/C 1: 7, 240 degrees C and 24 h. The thermodynamic calculation results show that ZrO2 combines with carbon to form CO and ZrC when the temperature reaches 1656.56 degrees C. As the temperature rises, CO reacts with ZrO2 to form ZrC and CO2. TG-DSC shows that the carbothermal reduction reaction starts at 1100 degrees C and reaches its peak at 1418 degrees C. XRD analysis confirms that when the temperature reached 1450 degrees C ZrC appeared. At 1600 degrees C, the phase transition of ZrC is basically completed. TEM images showed that the synthesized zirconium carbide particles were about 30 nm.

Stabilization of Cubic Zirconia by Carbon Nanotubes

Fabrication and Characterization of Y2O3 Stabilized ZrO2 Films Deposited with Aerosol-Assisted MOCVD

Addition of Carbon Nanotubes During the Preparation of Zirconia Nanoparticles: Influence on Structure and Phase Composition

Hydrothermal Synthesis and Characterization of Zirconia Nanocrystallites

Cubic phase stability, optical and magnetic properties of Cu-stabilized zirconia nanocrystals

Nanostructured Hybrid Carbon Nanotube/UltraHigh‐Temperature Ceramic Heterostructures: Microstructure Evolution and Forming Mechanism

An investigation of zirconium oxide particles supported on carbon nanotubes

Synthesis of zirconia nanoparticles on carbon nanotubes and their potential for enhancing the fracture toughness of alumina ceramics

Oxygen vacancy mediated cubic phase stabilization at room temperature in pure nano-crystalline Zirconia films: A combined experimental and first-principles based investigation

Nanocrystalline Cubic Phase Scandium-Stabilized Zirconia Thin Films

Preparation and Properties of CaTiO_3:Zn Nanoparticles Based on Sol-Gel Method

Synthesis of Monolithic Zirconia with Macroporous Bicontinuous Structure Via Epoxide-Driven Sol–gel Process Accompanied by Phase Separation

Preparation and characterization of yttria-stabilized zirconia nanotubes

Optimization of the structure and morphology of monoclinic phase nanoscale zirconium dioxide

Stabilization of the tetragonal phase in large columnar zirconia crystals without incorporating dopants

Fine Tuning of the Sizes and Phases of ZrO2 Nanocrystals

Nanostructured Hybrid Carbon Nanotube-Ceramics Heterostructures: Microstructure And Forming Mechanism

Continuous Supercritical Hydrothermal Synthesis of Stabilized ZrO2 Nanocomposites: Doping Mechanism of Typical Metals and Transition Elements

Texture and Surface Morphology Effects on Tetragonal Phase Stabilization in Zro2 Films Deposited by Metal-Organic Chemical Vapor Deposition

Enhancing the wettability and interface bonding in carbon nanotubes reinforced 2A70 alloy by the coating of ZrO2

Preparation and Characterization of Zirconium Carbide Nano Powder by Hydrothermal and Carbothermal Reduction Methods