Abstract:BACKGROUND Zirconia is one of the most widely used ceramic materials for transplanting and treating caries. This study aimed to synthesize zirconium oxide (ZrO₂) nanotubes and evaluated their characteristics. MATERIAL AND METHODS Zr film was prepared using an ion plating method. Nanoarray film was constructed with anodizing. Photocatalytic properties of nnanotubes were assessed by evaluating decolorization of methyl orange. Elemental analysis and structural morphology for coatings were evaluated using x-ray analysis and scanning electron microscopy (SEM). Dimensions for layers were measured with SEM imaging. X-ray diffraction (XRD) was measured using Empyrean x-ray diffractometry. RESULTS There were irregular cavities on the surface of ZrO₂ nanotubes undergoing anodizing of 30V. Anodizing voltage of 45 V (with regular nano-pore arrays and smooth nanotube walls) and anodic oxidation duration of 60 min (ZrO₂ nanotubes clearly formed atop ZrO₂-coated substrate surface) were the optimal condition for ZrO₂ nanotube formation. TEM illustrated tube length of ZrO₂ nanotubes was approximately 2.01 μm. Nanotube diameter was 51.06 nm, and wall thickness was 13 to 14 nm. Annealed nanotubes showed an obvious crystal diffraction pattern. TEM diffraction ring showed nanotube array without obvious transistor structure before annealing, but with good crystallinity post-annealing. Increased annealing temperatures result in enhanced intensity for the monoclinic phase (400-800°C). After annealing at 600°C, the decolorization effect of ZrO₂ nanotubes on methyl orange was better than that post-annealing at 400 and 800°C. ZrO₂ nanotubes demonstrated higher microshear bond strength. CONCLUSIONS Zirconium nanotubes were successfully synthesized and demonstrated good structural characteristics, which can be applied to transplanting and treating caries.

An investigation of zirconium oxide particles supported on carbon nanotubes

EFFECT OF LONG CHAIN CATIONIC SURFACTANT ON ZSM-5 SYNTHESIS AND METHANOL TO OLEFIN REACTION

Stability of TiO 2 Nanoparticles in Deionized Water with ZrP Nanoplatelets

Improving the Stability of Tio2 Aqueous Suspensions by Coupling Tio2 Nanoparticles on Zrp Nanoplatelets

Understanding Interfacial Dynamics: Hydrostatic Pressure-Induced Sono-Dispersion of Carbon Nanotubes

Stabilization of Cubic Zirconia by Carbon Nanotubes

Dispersant Selection for Nanomaterials: Insight into Dispersing Functionalized Carbon Nanotubes by Small Polar Aromatic Organic Molecules

Adsorption of Triton X-series surfactants and its role in stabilizing multi-walled carbon nanotube suspensions

Utilizing Fullerenols as Surfactant for Carbon Nanotubes Dispersions Preparation

Synthesis and Characterization of a Nanocomplex of ZnO Nanoparticles Attached to Carbon Nanotubes

Effect of surfactant structure on the stability of carbon nanotubes in aqueous solution.

Enhancing the wettability and interface bonding in carbon nanotubes reinforced 2A70 alloy by the coating of ZrO2

Clay Minerals Affect the Stability of Surfactant-Facilitated Carbon Nanotube Suspensions.

Adsorption of phosphate by zirconia functionalized multi-walled carbon nanotubes

Surfactant removal with multiwalled carbon nanotubes

Preparation of ZrO2 Nano-Particles by the Hydrolysis of ZrOCl2 Solution in the Reverse Micelles

Dispersion, sedimentation and aggregation of multi-walled carbon nanotubes as affected by single and binary mixed surfactants

Addition of Carbon Nanotubes During the Preparation of Zirconia Nanoparticles: Influence on Structure and Phase Composition

Preparation of a Novel Transplant Material, Zirconium Oxide (ZrO₂) Nanotubes, and Characterizations Research

Synthesis of zirconia nanoparticles on carbon nanotubes and their potential for enhancing the fracture toughness of alumina ceramics

Aqueous Stabilization of Carbon Nanotubes: Effects of Surface Oxidization and Solution Chemistry.