Abstract:Titania nanotubes (TNTs) were synthesized by hydrothermal treatment of rutile-phase TiO2 nanoparticals in NaOH solution at 110 degrees C for 24 hours. After drying in aceton for 36 h, the TNTs were under vacuum drying for 24 h at room temperature. The Pt-inserted titania nanotubes (Pt/TNTs) were obtained by filling H2 PtCl6 ethanol solution into the TNTs after vacuum drying. The characterizations of the as-synthesized samples were confirmed by TEM, XRD, and UV-Vis. The photocatalytic activity of the Pt/TNTs was investigated by photo-induced decomposition of methyl orange(MO)under the main 365 nm UV-light. In order to comparison, the photocatalytic activity of both the rutile-phase TiO2 nanoparticles and pure TNTs were also investigated at the same time under the same experimental conditions. The TEM images show that the TNTs are hollow, a few hundred nanometers long, and the inner/outer diameter is about 6/10 nm. The crystal structure of TNTs is H2Ti2O5 x H2O with a little Na. Both the shape and the crystalline of the TNTs are not changed after the modification. The oval or round Pt0 nanoparticals, about 3 nm in diameter, are found only in the nanotubes. Pt/TNTs exhibit enhanced absorption at the visible range in the UV-Vis spectra and its start absorption band edge(lambda0 approximately 457 nm)is obviously redshifted compared to the rutile-phase TiO2 nanoparticals and pure TNTs. The Pt nanoparticles are found to significantly enhance the photocatalytic activity of TNTs. Pt/TNTs are demonstrated to be highly efficient for the UV-light induced photocatalytic decomposition of MO compared to both the rutile-phase TiO2 nanoparticals and pure TNTs. After irradiation for 60 min, the photocatalysis decomposition rate of MO in rutile-phase TiO2 nanoparticals, TNTs and Pt/TNTs are 46.8%, 57.2% and 84.6% respectively.

The preparation and TiO_2 nanotubes photocatalytic degradation of methyl orange research

Enhanced Visible-Light-Induced Photoelectrocatalytic Degradation of Methyl Orange by CdS Sensitized TiO2 Nanotube Arrays Electrode

Preparation and Photocatalytic Activities of TiO2 Nanotubes with Mixed Crystal Structure

Preparation of TiO_2/SiO_2 and Photo-Catalytic Degradation of Methyl-Orange

Exploration of the active species in the photocatalytic degradation of methyl orange under UV light irradiation

Preparation of Titania Nanotube and Its Photocatalytic Performance for MB Photo-Degradation

Preparation and Photocatalytic Performance of Titania Nanotubes Loaded with Ag Nanoparticles

TiO2 Nanoparticles Supported on PMMA Nanofibers for Photocatalytic Degradation of Methyl Orange

Hydrothermal Preparation of TiO2 Nanotubes and Its Photocatalytic Performance

Photocatalytic Degradation of Methyl Orange by Using Different Shape-controlled TiO2 Micro-crystals

Fabrication of Fe2O3/TiO2 Nanotube Electrode and Its Photoelectrocatalytic Performance in Dye Wastewater Degradation

Enhanced Photocatalytic Degradation of Methyl Orange by Au/TiO2 Nanotubes

Sonophotocatalytic Degradation of Methyl Orange by Carbon Nanotube/tio2 in Aqueous Solutions.

Photodegradation of an Azo Dye Using Immobilized Nanoparticles of TiO2 Supported by Natural Porous Mineral.

Preparation and characterization of the nanometer TiO2 immobilized on macro-porous-resin

Controlled hydrolytic synthesis of nanosized titania and evaluation of photodegradation of methyl orange

Fabrication and Photocatalytic Activity of Pt-Inserted Titania Nanotubes

Fabrication of Fe<SUB>2</SUB>O<SUB>3</SUB>/TiO<SUB>2</SUB> Nanotube Electrode and Its Photoelectrocatalytic Performance in Dye Wastewater Degradation

Fabrication of Fe 2 O 3 /TiO 2 Nanotube Electrode and Its Photoelectrocatalytic Performance in Dye Wastewater Degradation: Fabrication of Fe 2 O 3 /TiO 2 Nanotube Electrode and Its Photoelectrocatalytic Performance in Dye Wastewater Degradation

Photocatalytic degradation of methyl orange using a TiO2/Ti mesh electrode with 3D nanotube arrays.

Photocatalytic degradation of methyl orange in aqueous suspension of mesoporous titania nanoparticles