Abstract:The reduction of nitric oxide using ammonia combined with methane and pulverized coal additives has been studied in a drop tube furnace reactor. Simulated flue gas with 1000 ppm NO(x) and 3.4% excess oxygen was generated by cylinder gas. Experiments were performed in the temperature range of 700-1200 degrees C to investigate the effects of additives on the DeNO(x) performance. Subsequently, a kinetic mechanism was modified and validated based on experimental results, and a computational kinetic modeling with CHEMKIN was conducted to analyze the secondary pollutants. For both methane and pulverized coal additives, the temperature window is shifted towards lower temperatures. The appropriate reaction temperature is shifted to about 900 and 800 degrees C, respectively with 1000 ppm methane and 0.051 g min(-1) pulverized lignite coal. The addition of methane and pulverized coal widens the temperature window towards lower temperature suggesting a low temperature application of the process. Furthermore, selective non-catalytic reduction (SNCR) reaction rate is accelerated evidently with additives and the residence time to complete the reaction is shortened distinctly. NO(x) reduction efficiency with 80% is achieved in about 0.3s without additive at 1000 degrees C. However, it is achieved in only about 0.2s with 100 ppm methane as additive, and only 0.07 and 0.05s are needed respectively for the cases of 500 and 1000 ppm methane. The modified kinetic modeling agrees well with the experimental results and reveals additional information about the process. Investigation on the byproducts where NO(2) and N(2)O were analyzed by modeling and the others were investigated by experimental means indicates that emissions would not increase with methane and pulverized coal additions in SNCR process and the efficacious temperature range of SNCR reaction is widened approximately with 100 degrees C.

Mathematic model of selective catalytic reduction of NO with NH3 in experiment-scale reactor

Modeling and Simulation of Commercial Catalytic Reformers

Reaction Kinetics of Selective Catalytic Reduction of NO with NH3

Modeling and Performance Analysis of SCR DeNOx Catalyst for Reducing NOx Emissions in Diesel Engine

Numerical Simulation of Selective Catalytic Reduction of NO and SO2 Oxidation in Monolith Catalyst

Effect of Methane and Temperature on NO Removal Using by the Selective Non-Catalytic Reduction

In Situ DRIFTS Studies of NH3-SCR Mechanism over V2O5-CeO2/TiO2-ZrO2 Catalysts for Selective Catalytic Reduction of NOx

An experimental and modelling study of the Selective Non-Catalytic Reduction (SNCR) of NOx and NH3 in a cyclone reactor

Numerical Investigation on the Intraphase and Interphase Mass Transfer Limitations for NH3-SCR over Cu-ZSM-5

Experimental and Modeling Study of the Effects of Multicomponent Gas Additives on Selective Non-Catalytic Reduction Process

Kinetic Study on Selective Catalytic Reduction of NO with NH3 over V2O5/TiO2 Catalysts

Kinetic Modeling of Non-Hydrocarbon/nitric Oxide Interactions in a Flow Reactor above 1,400K

Experimental Study on Preparation of V_2O_5-WO_3-MoO_3/TiO_2 Catalysts and Selective Reduction of NO_x with NH_3

Molecular-Level Insight into Selective Catalytic Reduction of NOx with NH3 to N2 over a Highly Efficient Bifunctional Va-MnOx Catalyst at Low Temperature

Flow Reactor Experiments and Kinetics Modeling on Selective Non-catalytic Removal of Nox under Different O2 Atmospheres

Experimental and Modeling Study on the Influence of H2 Addition on Selective Non-catalytic Reduction Process

The Role of NH_3 in the Low-Temperature Selective Catalytic Reduction of NO over MnO_x/TiO_2

Experimental and Modeling Study of the Effect of CH(4) and Pulverized Coal on Selective Non-Catalytic Reduction Process.

Experimental Study of Selective Non-catalytic Reduction of NO by NH_3

Experimental and Modeling Study on the Mechanism and Sensitive Parameters of the Thermal DeNOx Process

Performance of V_2O_5-WO_3-MoO_3/TiO_2 Catalyst for Selective Catalytic Reduction of NO_x by NH_3