Abstract:Heat treatment is the most common method to relieve residual stress and to adjust tensile properties in additively manufactured material. However, the well-known strengthening factors (e.g., dislocation density, cellular sub- structure, low angle grain boundaries, nano-oxide particle) in selective laser melted 316 L (SLM 316 L) are strongly influenced by heat-treatment temperature. In this work, horizontal and vertical oriented SLM 316 L specimens are heat treated from 550 degrees C to 1150 degrees C, followed by tensile tests and microstructural characteriza- tion. With increasing temperature, strength (e.g., yield strength, ultimate tensile strength) is found to decrease and elongation is found to increase. The heat treatments of 550 degrees C, 650 degrees C and 750 degrees C lead to coarsening of cellular sub-structure. Furthermore, the cellular sub-structure and melt boundaries annihilate at 950 degrees C. When the temperature reaches 1150 degrees C, SLM 316 L has finished recrystallization with volume fraction of nano-oxide particles increasing greatly. Based on microstructural characterization, the proposed relationship, considering strengthening mechanisms of cellular sub-structure, nano-oxide particle and grain boundaries, give satisfactory accuracy to predict yield strength for horizontal orientation. The yield strength for vertical orientation can also be predicted by this relationship when modified by consideration of anisotropy of columnar grains and lack-of- fusion defects. The anisotropy and lack-of-fusion lead to 5.4% reduction in yield strength for the vertical orientation. This work establishes quantitative relationships for heat treatment-microstructure-property, in which the anisotropy of tensile properties is considered.

The Process Research of 316L Stainless Steel in Selective Laser Melting

Simulation and experimental studies on process parameters, microstructure and mechanical properties of selective laser melting of stainless steel 316L

Study on performance optimization of 316L stainless steel parts by High-Efficiency Selective Laser Melting

Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel

Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting

Comprehensive Investigation of the Mechanical Properties of 316L Stainless Steel Processed via Laser Powder Bed Fusion

Strengthening Mechanisms in Selective Laser Melted 316L Stainless Steel

Effect of layer-by-layer laser remelting process on the microstructure and performance of selective laser melting 316L stainless steel

Influence of the Processing Parameters on the Microstructure and Mechanical Properties of 316L Stainless Steel Fabricated by Laser Powder Bed Fusion

Experimental study on parameters optimization of selective laser melting 316L stainless steel based on response surface methodology

Influence of processing parameters on the density of 316L stainless steel parts manufactured through laser powder bed fusion

The effect of selective laser melting process parameters and remelting scanning strategy on relative density and surface hardness of stainless steel 316L

Investigation on the Attainment of High-Density 316L Stainless Steel with Selective Laser Sintering

Experimental Characterization and Strengthening Mechanism of Process-Structure-property of Selective Laser Melted 316 L

Process optimization of micro selective laser melting and comparison of different laser diameter for forming different powder

Tailoring the Microstructural and Mechanical Properties of 316L Stainless Steel Manufactured by Laser Powder Bed Fusion

Effect of Process Parameters on Density and Mechanical Behaviour of a Selective Laser Melted 17-4PH Stainless Steel Alloy

Study on the Fabrication Process of 316L Stainless Steel via Electron Beam Selective Melting

Effect of selective laser melting process parameters on the microstructure and properties of a precipitation hardening stainless steel

Selective Laser Melting and Mechanical Properties of Stainless Steels

Structural and micromechanical properties of 316L stainless steel produced by selective laser melting