Abstract:In this work, a series of long-term treatment trials were conducted to evaluate the remediation performance of amorphous iron pyrite (FeS(2()am())) toward hexavalent chromium (Cr(VI)) in chromite ore processing residue (COPR). The effectiveness of FeS(2()am()) was assessed using alkaline digestion, the synthetic precipitation leaching procedure (SPLP) and the physiologically based extraction test (PBET). Reaction mechanisms were explored by monitoring the changes in the solid pH, redox potential (Eh), the chemical states of relevant elements as well as the crystal forms present in COPR. The results showed that, using a proper dosage, the total content of Cr and Cr(VI) in the leachate from treated COPR met the Chinese standard regulatory limits for the extraction toxicity of hazardous wastes (GB 5085.3-2007). In addition, the in vitro bioaccessibility of Cr(VI) in COPR was also significantly reduced. Moreover, the remediation effect was maintained for the subsequent six months. This long-term effect was attributed to the presence of reductive sulfur (S) species and Fe(II) that remained even after 180 days of treatment, which were identified using high-resolution X-ray photoelectron spectroscopy (HR-XPS) and X-ray diffraction (XRD). To maximize the effect of FeS(2()am()), 5% lime was employed as an additive to adjust the pH and thus contributed to Cr(VI) reduction and immobilization. To remediate COPR within 30 days, the use of 5% lime and a specific FeS(2()am()) dosage (FeS(2()am()):Cr(VI) 1.25:1) is recommended based on the results. For rapid remediation (< 1 day), the use of 5% lime and a 2.5:1 FeS(2()am()):Cr(VD ratio is recommended. In comparison with widely studied re ductal , FeS(2()am()) showed excellent efficiency for the remediation of COPR over both short- and long-term treatment trials, demonstrating it is a very promising alternative treatment method. (C) 2018 Elsevier B.V. All rights reserved.

Impact of Pyrolysis Process on the Chromium Behavior of COPR.

Remediation of Chromite Ore Processing Residue by Pyrolysis Process with Sewage Sludge.

Pyrolysing Wood Into Carbons For Cr(Vi) Adsorption: Performances Compared To Mineral Adsorbents

Study on the remediation of chromite ore processing residue by pyrolysis process

Treatment of Chromite Ore Processing Residue by pyrolysis with rice straw

INTENSIFICATION OF ADSORPTION PROCESS BY USING THE PYROLYTIC CHAR FROM WASTE TIRES TO REMOVE CHROMIUM(VI) FROM WASTEWATER

Experimental study on reduction of Cr (VI) by co-pyrolysis of polyethylene/chromite ore processing residue

Effective Cr(VI) reduction and immobilization in chromite ore processing residue (COPR) contaminated soils by ferrous sulfate and digestate: A comparative investigation with typical reducing agents

Research on the environmental stability performance of chromite ore processing residue solidified products

Study on the co-pyrolysis behaviors of sewage sludge and Enteromorpha prolifera and the adsorption mechanism of Cr(VI) in water using pyrolysis residue

Remediation of Cr(Ⅵ) in Chromite Ore Processing Residue by Sodium Sulfite and Sodium Phosphate

Detoxification of chromium slag using corn stalk for the hierarchical preparation of ultrafine aluminum hydroxide and iron hydroxide

Study on the detoxification of Cr(Ⅵ)-contaminated soil by pyrolysis

Efficient immobilization and utilization of chromite ore processing residue via hydrothermally constructing spinel phase Fe2+(Cr3+X, Fe3+2-x)O4 and its magnetic separation

Application of Chromium Slag Detoxified by Pyrolysis for Phosphorus Removal in Waste Water Treatment

Particle size and pH effects on remediation of chromite ore processing residue using calcium polysulfide (CaS5)

Research progress on hazardous chromite ore processing residue treatment and utilization: a critical review

Leaching of Valuable Elements from the Waste Chromite Ore Processing Residue: A Kinetic Analysis

Modes of Occurrence of Chromium and Their Thermal Stability in Low-Rank Coal Pyrolysis

Reduction and Immobilization of Hexavalent Chromium in Chromite Ore Processing Residue Using Amorphous FeS2.

Water/acid/reductive biomass leaching of Cr(VI) in chromium ore processing residue (CORP) for safe discharge of effluent and to recover Cr(III) and gypsum