Abstract:Chromite ore processing residue (COPR) has been a severe environmental contaminant which is worthy of attention. In this study, we developed an eco-friendly and practical technology for effectively stabilizing and recovering Cr(VI) in COPR via combining FeSO4 reducing agent and the hydrothermal treatment. A stable spinel phase product was formed during detoxification. In addition, the ferrochrome resources in the treated COPR can be obtained by magnetic separation. As we studied, the hydrothermal environment promoted the release of unstable Na2CrO4 from COPR into the solution, and the released CrO42- was reduced to Cr(III) by FeSO4. Subsequently, Cr(III), Fe(II) and Fe(III) were hydrothermally mineralized to form the magnetic spinel phase Fe2+(Cr3+X, Fe3+2-x)O4 (FeCr spinel substance), which was conducive to the magnetic separation of ferrochrome resources. Under the optimal hydrothermal conditions (0.15 g FeSO4/2 g COPR, treatment at 180 °C for 8 h), the total Cr leaching concentration of treated COPR (COPR-HT) was decreased from 120.51 mg L-1 to 0.23 mg L-1, well below the regulatory limit of 1.5 mg L-1 (HJ/T 301-2007, China EPA). After 300 days aging under atmospheric conditions, the total Cr leaching concentration of COPR-HT was still below 1.5 mg L-1. Besides, the COPR-HT after magnetic separation contained 11.52 wt% Cr2O3 and 53.44 wt% Fe2O3, which can be used as the raw material for steel industry. The underlying mechanism of COPR stabilization was explained by XRD, XPS and SEM-EDS analysis. This work converted the toxic and unstable Cr(VI) in COPR into the long-term stable FeCr spinel substance that is easy to magnetically separate. It has important reference for the harmless disposal and resource utilization of other chromium-containing hazardous wastes including chromium slag and electroplating sludge.

Research progress on hazardous chromite ore processing residue treatment and utilization: a critical review

Towards holistic technology solution to chromite ore processing residue (COPR) challenge; global issue: review and analysis

Efficient immobilization and utilization of chromite ore processing residue via hydrothermally constructing spinel phase Fe2+(Cr3+X, Fe3+2-x)O4 and its magnetic separation

Research on the environmental stability performance of chromite ore processing residue solidified products

Effective Cr(VI) reduction and immobilization in chromite ore processing residue (COPR) contaminated soils by ferrous sulfate and digestate: A comparative investigation with typical reducing agents

Detoxification of chromium slag using corn stalk for the hierarchical preparation of ultrafine aluminum hydroxide and iron hydroxide

Leaching of Valuable Elements from the Waste Chromite Ore Processing Residue: A Kinetic Analysis

Water/acid/reductive biomass leaching of Cr(VI) in chromium ore processing residue (CORP) for safe discharge of effluent and to recover Cr(III) and gypsum

Remediation of Cr(Ⅵ) in Chromite Ore Processing Residue by Sodium Sulfite and Sodium Phosphate

Valuable Recovery Technology and Resource Utilization of Chromium-Containing Metallurgical Dust and Slag: A Review

LED-driven photocatalytic degradation of tetracycline by chromite ore processing residue (COPR): Mechanism, pathway, toxicity assessment

Immobilization of chromium ore processing residue by alkali-activated composite binders and leaching characteristics

Recycling technology and progress of research on chromium

Sufficient extraction of Cr from chromium ore processing residue (COPR) by selective Mg removal

Research status and research ideas of chrome tanning waste disposal

Transformation and Detoxification of Typical Metallurgical Hazardous Waste into a Resource: A Review of the Development of Harmless Treatment and Utilization in China

A Critical Review on Approaches for Phosphorus Ore Flotation Tailings Treatment and Disposal Technology: Environment Properties, Comprehensive Utilization, and Resource Utilization

Preparation and application of alkali-activated cementitious materials in solidification/stabilization of chromite ore processing residue

A New Method (Ball Milling and Sodium Sulfide) for Mechanochemical Treatment of Soda Ash Chromite Ore Processing Residue

Resource utilization strategies for spent pot lining: A review of the current state

Remediation of Cr~(6+) in Chromite Ore Processing Residue by Sodium Thiosulfate and Sodium Phosphate