Abstract:Hollow fiber membranes fabricated via dry/wet phase inversion method usually have two dense skin layers,which will increase its resistance of mass transport as a support membrane. It is necessary that the dense skin layer of support membrane has been eliminated to improve separation performance of composite membrane. The excellent. chemical resistance of poly(vinylidene fluoride) (PVDF) to many acids and alkalis has made it as an attractive membrane material, and then it's often fabricated as porous hollow fiber membrane by phase inversion. In the process, the formation of the skin layer is due to the rapid exchange between solvent and coagulation, so many attempts have been made to slow it, so as to control the formation of the skin layer. In this paper, it has been found that the fabrication progress becomes unstable, and the membrane prepared has noncircular lumen, when the "weak" or "soft" coagulation is used. To increase the fabrication solution stability during membrane formation, dope viscosity was focused in this experiment. Dimethyl acetamide (DMAc) was used as solvent as well as internal coagulant, and the additives including LiCl, water and surfactant Span were chosen to investigate their effect oil the viscosity of the fabrication solution. The dope viscosity will greatly increase after adding LiCl, while the variety of dope viscosity is unconcerned in the fabrication solution concentration as adding water. The homogenization and stability of the fabrication solution are improved by adding Span,and the viscosity increases at the same time. Without increasing PVDF concentration, the stability of the nascent membrane was improved by increasing the fabrication viscosity. The PVDF hollow fiber membrane with the structure of single outer skin layer and finger-like pore through the cross-section, has been successfully fabricated. The mean pore radius and water flux of the single skin hollow fiber membrane were greatly improved.

Study on the Preparation of High Strength Composite PVDF Hollow Fiber Membrane Ⅰ. the Effect of PVDF Coating Solution on the Membrane Performance

Study on the Preparation of High Strength Composite PVDF Hollow Fiber Membrane (ⅱ)the Effect of Concentration of Ethanol in External Coagulation and PET Threads Number on Membrane Performance

Structure formation and characterization of PVDF hollow fiber membranes by melt-spinning and stretching method

Fabrication of Hydrophilic and Sponge-Like PVDF/brush-like Copolymer Blend Membranes Using Triethylphosphate As Solvent

Effects of Preparing Condition on PVDF Membrane Morphology

Preparation of PET Threads Reinforced PVDF Hollow Fiber Membrane

Influence of Dope Viscosity on the Fabrication of Pvdf Hollow Fiber Membranes with Single Skin Layer

STUDY ON THE PREPARATION OF PVDF MICROPOROUS HOLLOW FIBER MEMBRANE

Robust preparation and reinforcement mechanism study of PVDF hollow fiber membrane with homogeneous fibers

Preparation and characterization of Fe(Ⅲ)-Cu(Ⅱ)/PVDF hollow fiber membrane

Preparation and Properties of PVDF/PTFE Composite Membrane by Spin-coating

Preparation of hydrophilic and fouling resistant poly(vinylidene fluoride) hollow fiber membranes

Study on PVDF Ultrafiltration Membrane Experiment Preparation and Membrane Formation Mechanism

Preparation of Polyvinylidene Fluoride (PVDF) Hollow Fiber Composite Nanofiltration Membrane Ⅰ. Fabrication of the Composite Nanofiltration Membrane

Preparation Of Pvdf Hollow Fiber Membranes With High Adsorption Performance By One-Step Physical Coating And Chemical Cross-Linking

Effects of Pore-Forming Additives on Structures and Properties of Pvdf/Fe3+/Cu2+ Hollow Fiber Membranes

Preparation and characterization of Fe(III)-Cu(II)/PVDF hollow fiber membrane

Effect of Polymer Molecular Weight on Structure and Performance of PVDF Hollow Fiber Membranes Prepared Via TIPS Process with Co-Extrusion of Solvent Using Triple Orifice Spinneret

Preparation and characterization of polyvinylidene fluoride (PVDF) hollow fiber membranes

Preparation and Properties of MWCNTs/PVDF Blend Hollow Fiber Membrane

Preparation and Characterization of PVDF-SiO_2 Composite Hollow Fiber Membrane