Abstract:In the field of non-destructive evaluation (NDE) of solid metal materials, it has been a challenge to detect surface and internal defects simultaneously by using a single physical mechanism technique. Conventionally, different testing techniques, in which each one is particularly sensitive to a certain type of defect, are employed to gain full defect information. However, a separated testing method is always a time-consuming and laborious work. Here, we report a magnetoelectric-ultrasonic hybrid transducer and multimodal system for quantitative NDE of metal, which integrates a magnetoelectric composite wrapped with a coil for generating alternating current field and simultaneously measuring magnetic abnormal of surface defects (referred to as ME-ACFM) and a dual-piezoceramic ultrasonic transducer (DP-UT) for generating acoustic pulses and detecting the echo signal of internal defects, respectively. A bipulse signal with different pulse widths is used for excitation of the hybrid transducer, in which one is corresponded to the resonant frequencies of 5 MHz for DP-UT, and another to 122 kHz for ME-ACFM. The huge difference between two resonant frequencies is helpful for restraining signal interference each other. Experimental investigations show that when scanning the tested specimens (standard steel No.45 and aluminum plates), the surface and internal defects information can be obtained simultaneously almost without a dead zone. The surface defect resolutions of 0.1 mm width and 0.1 mm depth, and the inside defect resolution of 2 mm blind hole are obtained; the experimental errors for surface defect (crack) depth up to 5 mm are around 5 %; while experimental errors for ultrasonic depth measurement (with a blind zone of 1.25 mm) is less than 0.63 mm. The proposed hybrid transducer and multimodal system open up a new way for designing multi-physical mechanism based NDEs.

Application of the Magneto-Optic Faraday Effect in NDT

Multiphysics Structured Eddy Current and Thermography Defects Diagnostics System in Moving Mode.

A Novel Self-Compensating GMR-Based Eddy Current Probe for Hidden Crack Detection

Quantifying Hidden Defect In Multi-Layered Structures By Using Eddy Current System Combined With A Scanner

Imaging of material defects with a radio-frequency atomic magnetometer

A magnetoelectric-ultrasonic multimodal system for synchronous NDE of surface and internal defects in metal

Deep Defects Evaluation of Conductive Materials Based on Eddy Current Nondestructive Testing with GMR sensor

Quantitative Nondestructive Estimation of Deep Defects in Conductive Structures

Mechanism of Magnetic Permeability Perturbation in Magnetizing-Based Eddy Current Nondestructive Testing

Physical coupling fusion sensing of MFL-EMAT for synchronous surface and internal defects inspection

Detection of Surface and Back-Surface Defects on Metal Plate via Rectangular Wave Eddy Current Testing Using Magnetoresistive Sensor

Nondestructive Testing Method for Internal Defects in Ferromagnetic Materials under Weak Bias Magnetization

An Eddy Current Probe for the Detection of Subsuperficial Defects of Any Orientation

Rotating Focused Field Eddy-Current Sensing for Arbitrary Orientation Defects Detection in Carbon Steel

Imaging and quantitative detection of complex defects with a flexible electromagnetic array sensor

A Novel Eddy Current Testing Scheme by Transient Oscillation and Nonlinear Impedance Evaluation

Novel interventional electromagnetic thermography for subsurface defect detection

Advancing eddy current detection probes with magnetoelectric composite Materials: Enhancing crack detection in conductive materials

A Combined Inductive and Capacitive Non-Destructive Evaluation Technique Using a Single Spiral Coil Sensor

A 3-D Imaging Method for Local Shallow Defects on the Surface of Ferromagnetic Materials

The instrumental uses of autonomy: a review of AIDS law and policy in Europe.