Abstract:In the process of underground construction, it is common to spray concrete on the working surface, which will form a concrete-rock composite structure, to achieve the expected reinforcement effect. Compared with pure concrete or rock structures, composite structures have different mechanical properties, energy evolution and damage characteristics. Understanding the dynamic mechanics and damage characteristics of composite structures under impact loads is important to the safety of underground engineering construction. First, dynamic compression tests on different grades of mortar-sandstone composite specimens were carried out by using a Hopkinson pressure bar system to discuss the effect of impact velocities on the mechanical properties and failure modes of composite specimens. The results show that the dynamic peak stress, strain energy density and fragmentation block of the mortar-sandstone composite have an obvious strain rate effect. With an increase in impact velocity, the internal cracks of the sample do not have sufficient time to expand, and the energy absorbed by the sample leads to the continuous initiation of new cracks in the sample, resulting in an increasing damage degree of composite specimens. The increase in mortar strength can significantly increase the peak stress, improve the load-bearing capacity of the sample, and reduce the degree of sample damage. At the same impact velocity, the fragmentation degree of the mortar sample is more severe than that of sandstone, and the mortar sample is broken into powder debris, while the sandstone is broken into fragments. In addition, according to the failure properties of the composite sample, the mortar and sandstone samples are described by different damage models, and the dynamic damage constitutive model of the mortar-sandstone composite is established based on the overlay principle. The dynamic test results were fitted. The research shows that the fitting curves of the model are well fitted with the test curves and that the model accurately reflects the changes in the mechanical parameters of the composite specimens.

Rate Sensitive Damage Behavior of Mortar in Compression

Stress-Strain Behavior and Statistical Continuous Damage Model of Cement Mortar under High Strain Rates

Effect of Strain Rate and Water-to-cement Ratio on Compressive Mechanical Behavior of Cement Mortar

Quasi-static and Dynamic Experimental Studies on the Tensile Strength and Failure Pattern of Concrete and Mortar Discs

Moisture Transport of Axial-Compression-Damaged Mortar and Concrete in Atmospheric Environment

Experimental study of dynamic axial tensile constitutive relationship for mortar

Strain-rate sensitivity of concrete: Influence of moisture content

A microscopic approach to rate effect on concrete strength under combine load

Dynamic and Damage Characteristics of Mortar Composite under Impact Load

Simulation and Experimental Verification of the Non-Uniform Corrosion Cracking Process of Reinforced Mortar Specimen

Experimental Study on Dynamic Tensile Strength of Cement Mortar Using Split Hopkinson Pressure Bar Technique

Experimental Study on Dynamic Axial Tensile Mechanical Properties of Concrete and Its Components

Creep Characterization of Concrete Suffering Initial Damage

Assessing strain rate sensitivity of cement paste at the micro-scale through micro-cantilever testing

Dynamic compressive and splitting tensile tests on mortar using split Hopkinson pressure bar technique

Effect of Testing Method and Strain Rate on Stress-Strain Behavior of Concrete

Influence of Water-to-cement Ratio on Dynamic Compressive Behavior for Cement Mortar under High Strain Rate

STRAIN RATE EFFECT ON DYNAMIC BEHAVIORS OF CONCRETE MEMBERS

Influence of Free Water Content on the Compressive Mechanical Behaviour of Cement Mortar under High Strain Rate

Damage and Degradation Mechanism for Single Intermittent Cracked Mortar Specimens under a Combination of Chemical Solutions and Dry-Wet Cycles

Characterizing the effect of compressive damage on transport properties of cracked concretes