Abstract:High efficiency thin-film silicon (Si) solar cells were prepared on flexible substrates by the plasma-enhanced chemical vapor deposition method. To improve their performance, the microstructural, electrical, and optical properties of the core component layers including the metal rear reflectors, p- and n-type doped layers, and intrinsic absorber layers were controlled sophistically. To enable the use of flexible substrates with low heat resistance as well as to enhance light-scattering properties, nanotextured rear reflectors with a Ag/Al:Si bilayer structure were developed by dc magnetron sputtering at a low substrate temperature of below 150 degrees C. Highly crystalline n-doped seed layers (which effectively eliminate a defect-dense amorphous region formed in the initial growth stage of intrinsic nanocrystalline silicon (nc-Si:H) absorber layers) and p-type wide-bandgap nanocrystalline silicon carbide (nc-SiC:H) window layers (which reduce the parasitic absorption loss in the short wavelength region and increase the open circuit voltage (Voc)) were successfully applied to enhance the performance characteristics of the solar cells. Through the combination of the developed core component layers, high conversion efficiencies of 8.84% (V-oc = 0.53 V, J(sc) = 25.28 mA/cm(2), and fill factor (FF) = 0.66, where J(sc) is the short circuit current) and 7.48% (V-oc = 0.50 V, J(sc) = 21.07 mA/cm(2), and FF = 0.71) were obtained for nc-Si:H solar cells fabricated on stainless steel (SUS) and polyimide substrates, respectively, at a low substrate temperature of below 150 degrees C. Flexible a-Si:H/nc-Si:H double-junction solar cells fabricated on SUS substrates showed a high conversion efficiency of 11.46% (V-oc = 1.38 V, J(sc) = 11.53 mA/cm(2), and FF = 032) when the nc-Si:H solar cells developed in this study were applied as a bottom cell.

Investigation of Amorphous Silicon/Microcrystalline Silicon Tandem Solar Cells on Flexible Substrates

RESEARCH ON 400cm2 a-Si/a-Si TANDEM SOLAR CELLS

Study on Quantum Efficiencies of Microcrystalline Silicon Solar Cells on Flexible Substrates

AMORPHOUS SILICON/AMORPHOUS SILICON GERMANIUM TANDEM SOLAR CELLS ON FLEXIBLE SUBSTRATES

Effect of Tunnel Junctions on Properties of Amorphous Silicon/Microcrystalline Silicon Tandem Solar Cells on Flexible Substrates

STUDY ON MICROCRYSTALLINE SILICON THIN FILM SOLAR CELLS ON FLEXIBLE SUBSTRATE

P Type Microcrystalline Film and Its Application to Amorphous Solar Cells on Flexible Substrate

The Influence of N-Layer on Properties of Microcrystalline Silicon Solar Cells on Flexible Substrates

Amorphous silicon thin‐film solar cells deposited on flexible substrates using different zinc oxide layers

High Efficiency Amorphous/microcrystalline Silicon Tandem Solar Cells Deposited in a Single Chamber System

Progress in Investigation of Silicon Space Solar Cell

Silicon Nanocrystal Conjugated Polymer Hybrid Solar Cells with Improved Performance

Flexible silicon solar cells with high power-to-weight ratios

Performance Enhancement of Thin-Film Silicon Solar Cells by Development of Core Component Layers

Efficient Perovskite/Silicon Tandem Solar Cells on Industrially Compatible Textured Silicon

A study of superstrate amorphous silicon thin film solar cells and modules on flexible BZO glass

Impact of Metallic Shields on Characteristics of Microcrystalline Si Solar Cell on Flexible Substrates

Flexible Silicon Heterojunction Solar Cells and Modules with Structured Front-Surface Light Management

Flexible Semiconductor Technologies with Nanoholes-Provided High Areal Coverages and Their Application in Plasmonic-Enhanced Thin Film Photovoltaics

Fapbi(3) Flexible Solar Cells With A Record Efficiency Of 19.38% Fabricated In Air Via Ligand And Additive Synergetic Process

A Scalable Method for Fabricating Monolithic Perovskite/silicon Tandem Solar Cells Based on Low-Cost Industrial Silicon Bottom Cells