Abstract:Based on the CM excitation voltage spectrum measurement and the electromagnetic‐simulated radiation transfer functions, an accurate prediction of the radiated emissions of a low‐power flyback adapter with complex cables is achieved. Radiated emissions (RE) testing has long been a challenge in the development of a switched mode power supply (SMPS) with respect to electromagnetic compatibility performance. Accurate far‐field RE prediction can effectively help SMPS designers reveal and understand the mechanisms of radiation generation, and reasonably suppress it. In this paper, a model for predicting the radiation from a single excitation source and a parasitic radiator for a flyback adapter are proposed after analysing the common mode voltage and current paths. Then, novel methods are proposed to predict the far‐field RE of the flyback adapter based on measurements and electromagnetic simulations. Using these methods, the 10‐m far‐field radiation of the flyback adapter under the curved cables layout is accurately predicted and verified by experiments. Then, the characteristics and influencing factors of the radiation are analysed, including the far‐field patterns, the load volume, and the sag degree of the output cable. Finally, a suppression design of the capacitor‐inductor (CL) notch filter is designed for the frequency points that are above the standard limits, and the RE are reduced to less than 30 dBμV/m from 30 to 300 MHz. The research methods proposed in this paper have good reference significance for radiation analysis and prediction of power electronic devices.

Model and Simulation on Common Mode Radiation of a Flyback Power Supply

Model and Analysis on Electromagnetic Radiation of Flyback Power Supply by FDTD Simulation

A simulation platform of Switched-mode Power Supplies for EMI filter design

Far field radiated emissions prediction of a flyback adapter with curved cables utilizing electromagnetic simulation method

Mechanism Model and Prediction Method of Common Mode Radiation for a Nonisolated Very-High-Frequency DC–DC Converter with Cables

Transmission Line Model of Field-to-Wire Coupling with Transmission Line Cables from Near and Far Field Sources

A Fast EMI Model Based on Equivalent Interference Sources in Medium-Voltage Cascaded H-Bridge System

Modeling and Evaluation of Common-Mode EMI Coupling Through Converter Chassis in Metro Traction System

Modeling and Application of Conducted EMI in Switch Mode Power Supply

Common mode far field radiation mechanisms and prediction of a buck converter with cables based on common mode voltage mutation method

Magnetic Near Field Predication and Suppression of a Flyback SMPS

Modeling and Predicting for Common Mode Noise Disturbance in Flyback Converter

Evaluation Method of Flyback Converter Behaviors on Common-Mode Noise

Radiated Emission Prediction of a SMPS Based on Time Domain EMF-circuit Co-Simulation

Electromagnetic Radiation Mechanism Analysis and Field Strength Prediction of an Elementary Digital Inverter with Cables

Prediction of Radiated Emissions from Cables over a Metal Plane Using a SPICE Model

Near Field Effect Analysis and Common Mode Conducted EMI Model of a Switched Mode Power Supply

Determining Far-Field EMI From Near-Field Coupling of a Power Converter

EMI and EMC Analysis of Arbitrarily Shaped Power-Ground Planes

A Novel Integrated Approach for Simulation of Electromagnetic Susceptibility Problem

Modeling and Prediction of Low-Frequency Near-Field Radiation for a Power Converter Based on the Operating Principle of a Monopole Antenna