Abstract:Based on the CM excitation voltage spectrum measurement and the electromagnetic‐simulated radiation transfer functions, an accurate prediction of the radiated emissions of a low‐power flyback adapter with complex cables is achieved. Radiated emissions (RE) testing has long been a challenge in the development of a switched mode power supply (SMPS) with respect to electromagnetic compatibility performance. Accurate far‐field RE prediction can effectively help SMPS designers reveal and understand the mechanisms of radiation generation, and reasonably suppress it. In this paper, a model for predicting the radiation from a single excitation source and a parasitic radiator for a flyback adapter are proposed after analysing the common mode voltage and current paths. Then, novel methods are proposed to predict the far‐field RE of the flyback adapter based on measurements and electromagnetic simulations. Using these methods, the 10‐m far‐field radiation of the flyback adapter under the curved cables layout is accurately predicted and verified by experiments. Then, the characteristics and influencing factors of the radiation are analysed, including the far‐field patterns, the load volume, and the sag degree of the output cable. Finally, a suppression design of the capacitor‐inductor (CL) notch filter is designed for the frequency points that are above the standard limits, and the RE are reduced to less than 30 dBμV/m from 30 to 300 MHz. The research methods proposed in this paper have good reference significance for radiation analysis and prediction of power electronic devices.

Prediction of Radiated Emissions from Cables over a Metal Plane Using a SPICE Model

Transmission Line Model of Field-to-Wire Coupling with Transmission Line Cables from Near and Far Field Sources

Transient Responses Of Coaxial Cables In An Electrically Large Cabin With Slots And Windowns Illuminated By An Electromagnetic Pulse

Prediction Of Pcb Radiated Emission In Shielding Cavity Using Equivalent Dipole Modeling

An Effective and Efficient Approach for Radiated Emission Prediction Based on Amplitude-Only Near-Field Measurements

Spice Models for Radiated and Conducted Susceptibility Analyses of Multiconductor Shielded Cables

Radiated EMI Prediction in Power Converters with Power Cables Based on Cable Antenna Voltage Gain Extraction

Electromagnetic Radiation Mechanism Analysis and Field Strength Prediction of an Elementary Digital Inverter with Cables

Near-Field Measurements Based Source Reconstruction Approach for Radiated Emissions Prediction

SPICE Models to Analyze Radiated and Conducted Susceptibilities of Shielded Coaxial Cables

Radiated Electromagnetic Immunity Analysis of Flex Cable with Ground Plane Using Transmission Line Equations

Efficient Analysis of Radiated Immunity of Printed Circuit Boards Using SPICE

Radiated Emissions Prediction of an Electronic Packaging Based on Near-field Scanning

Far field radiated emissions prediction of a flyback adapter with curved cables utilizing electromagnetic simulation method

Near-Field Radiation Estimation and Its Reduction Using a Novel EBG for PCB

An Equivalent Dipole Model Hybrid with Artificial Neural Network for Electromagnetic Interference Prediction

An EM Imaging Method Based on Plane-Wave Spectrum and Transmission Line Model

Prediction of Electromagnetic Leakage from Circuits Inside Package

Mechanism Model and Prediction Method of Common Mode Radiation for a Nonisolated Very-High-Frequency DC–DC Converter with Cables

Estimating radiated emissions from printed circuit boards and cables inside EMC chambers

Common Mode Far-field Radiation Prediction of V-shaped Cables Based on Retarded Partial Element Equivalent Circuit Method