Abstract:This study investigates the common mode (CM) driving sources of a regular Buck converter in depth, derives the approximate analytical formulas for far field radiation of horizontal power cables, and realizes the accurate prediction of far field CM radiation based on the CM voltage mutation method. In the field of electromagnetic compatibility (EMC) research, the knowledge of the formation mechanism of the far field electromagnetic radiation and its prediction is essential for the electromagnetic noise suppression design of a switched mode power supply. This paper investigates the equivalent driving sources of the common mode (CM) current of a Buck converter with cables. Based on the concept of CM voltage mutation, this paper proposes two mechanism models of the same‐direction CM voltage driving mode and the opposite‐direction CM voltage driving mode and derives the approximate analytical formulas for the far field intensity estimation of the horizontal cables. To evaluate the predictive effectiveness of the CM far field radiation model, a 30 MHz very high frequency (VHF) Buck prototype with shielded cables is built and tested, and a shielding shell and low impedance ground conductor suppression designs are then verified. The CM electromagnetic radiation mechanisms of a non‐isolated power converter are demonstrated here. The proposed electromagnetic radiation models, approximate analytical formulas, and improvement design can help to advance the CM radiation analysis and optimization design.

Modeling and Prediction of Low-Frequency Near-Field Radiation for a Power Converter Based on the Operating Principle of a Monopole Antenna

A Modeling Technique for Low-Frequency Near-field Radiated EMI Measurement Based on the Study of the Mechanism of the Monopole Antenna

Analytical Modeling of Resonant Converters in Frequency Domain for Wireless Power Transfer: Continuous Current Mode (CCM) Operation

Modeling and Prediction of Radiated Electromagnetic Interference for DC-DC Power Converter

Determining Far-Field EMI From Near-Field Coupling of a Power Converter

Modeling and Evaluation of Common-Mode EMI Coupling Through Converter Chassis in Metro Traction System

Mechanism Model and Prediction Method of Common Mode Radiation for a Nonisolated Very-High-Frequency DC–DC Converter with Cables

A Novel Low-Frequency Radiated Emissions Prediction Technique for the Inductor of a Non-Isolated Power Converter

A New Hybrid Equivalent Modeling Method of Low-Frequency Radiation Source Based on GS and JADE Algorithms and Phaseless Near-Field Data

Non-Ideal Electric Field Shielding With Grounding Resistor For Suppressing Emi Coupling In A Power Converter

Far-Field Radiation Prediction and Analysis of a Power Converter with V-Shaped Flat Cables Based on PEEC

Radiated EMI Prediction in Power Converters with Power Cables Based on Cable Antenna Voltage Gain Extraction

An Effective and Efficient Approach for Radiated Emission Prediction Based on Amplitude-Only Near-Field Measurements

Near-Field Measurements Based Source Reconstruction Approach for Radiated Emissions Prediction

Review of Near-Field EMI Measurement

An Equivalent Dipole Model Hybrid with Artificial Neural Network for Electromagnetic Interference Prediction

Near-Field Radiation Estimation and Its Reduction Using a Novel EBG for PCB

Probe Design and Source Reconstruction for Near-Field Scanning and Modeling

An Effective Equivalent Radiation Source Based on Near-field Scanning for Electromagnetic Interference Estimation

An Efficient Dipole Array Model for the Accurate Prediction of Antennas Radiation Pattern

Common mode far field radiation mechanisms and prediction of a buck converter with cables based on common mode voltage mutation method