Abstract:Based on the CM excitation voltage spectrum measurement and the electromagnetic‐simulated radiation transfer functions, an accurate prediction of the radiated emissions of a low‐power flyback adapter with complex cables is achieved. Radiated emissions (RE) testing has long been a challenge in the development of a switched mode power supply (SMPS) with respect to electromagnetic compatibility performance. Accurate far‐field RE prediction can effectively help SMPS designers reveal and understand the mechanisms of radiation generation, and reasonably suppress it. In this paper, a model for predicting the radiation from a single excitation source and a parasitic radiator for a flyback adapter are proposed after analysing the common mode voltage and current paths. Then, novel methods are proposed to predict the far‐field RE of the flyback adapter based on measurements and electromagnetic simulations. Using these methods, the 10‐m far‐field radiation of the flyback adapter under the curved cables layout is accurately predicted and verified by experiments. Then, the characteristics and influencing factors of the radiation are analysed, including the far‐field patterns, the load volume, and the sag degree of the output cable. Finally, a suppression design of the capacitor‐inductor (CL) notch filter is designed for the frequency points that are above the standard limits, and the RE are reduced to less than 30 dBμV/m from 30 to 300 MHz. The research methods proposed in this paper have good reference significance for radiation analysis and prediction of power electronic devices.

A Novel Low-Frequency Radiated Emissions Prediction Technique for the Inductor of a Non-Isolated Power Converter

Modeling and Prediction of Low-Frequency Near-Field Radiation for a Power Converter Based on the Operating Principle of a Monopole Antenna

Analysis, Design, and Implementation of a Spatially Nested Magnetic Integration Method for Inductive Power Transfer Systems

External Magnetic Field Minimization for the Integrated Magnetics in Series Resonant Converter

Radiated Emission Prediction of a SMPS Based on Time Domain EMF-circuit Co-Simulation

EMI Noise Analysis for a High-Frequency Power Inductor Model Based PFC Converters

Determining Far-Field EMI From Near-Field Coupling of a Power Converter

Far field radiated emissions prediction of a flyback adapter with curved cables utilizing electromagnetic simulation method

Modeling and Prediction of Radiated Electromagnetic Interference for DC-DC Power Converter

Development of Simulation Prediction Techniques for Low Frequency Emissions

Radiated Emissions Prediction of an Electronic Packaging Based on Near-field Scanning

An Effective and Efficient Approach for Radiated Emission Prediction Based on Amplitude-Only Near-Field Measurements

Analysis and Suppression of Common-Mode EMI Noise in 1 MHz 380 V-12 V DCX Converter with Low NFoM Devices

A Coupled Inductor Scheme for CLLC Bidirectional Converter and Optimized Current Detection Method

Mechanism Model and Prediction Method of Common Mode Radiation for a Nonisolated Very-High-Frequency DC–DC Converter with Cables

Model of near-field coupling of conducted electromagnetic interference from Boost converter

A Circuit Model for Electromagnetic Suppressing Spurious Noise of Synchronous DC-DC Buck Convertor

An iterative source reconstruction based method for radiated emissions prediction from PCBs

Near-Field Radiation Estimation and Its Reduction Using a Novel EBG for PCB

A Modeling Technique for Low-Frequency Near-field Radiated EMI Measurement Based on the Study of the Mechanism of the Monopole Antenna

Far-Field Radiation Prediction and Analysis of a Power Converter with V-Shaped Flat Cables Based on PEEC