Abstract:Based on the CM excitation voltage spectrum measurement and the electromagnetic‐simulated radiation transfer functions, an accurate prediction of the radiated emissions of a low‐power flyback adapter with complex cables is achieved. Radiated emissions (RE) testing has long been a challenge in the development of a switched mode power supply (SMPS) with respect to electromagnetic compatibility performance. Accurate far‐field RE prediction can effectively help SMPS designers reveal and understand the mechanisms of radiation generation, and reasonably suppress it. In this paper, a model for predicting the radiation from a single excitation source and a parasitic radiator for a flyback adapter are proposed after analysing the common mode voltage and current paths. Then, novel methods are proposed to predict the far‐field RE of the flyback adapter based on measurements and electromagnetic simulations. Using these methods, the 10‐m far‐field radiation of the flyback adapter under the curved cables layout is accurately predicted and verified by experiments. Then, the characteristics and influencing factors of the radiation are analysed, including the far‐field patterns, the load volume, and the sag degree of the output cable. Finally, a suppression design of the capacitor‐inductor (CL) notch filter is designed for the frequency points that are above the standard limits, and the RE are reduced to less than 30 dBμV/m from 30 to 300 MHz. The research methods proposed in this paper have good reference significance for radiation analysis and prediction of power electronic devices.

Model and Analysis on Electromagnetic Radiation of Flyback Power Supply by FDTD Simulation

Model and Simulation on Common Mode Radiation of a Flyback Power Supply

Far field radiated emissions prediction of a flyback adapter with curved cables utilizing electromagnetic simulation method

A simulation platform of Switched-mode Power Supplies for EMI filter design

Radiated Emission Prediction of a SMPS Based on Time Domain EMF-circuit Co-Simulation

EMI Analysis of Multiscale Transmission Line Network Using a Hybrid FDTD Method

Magnetic Near Field Predication and Suppression of a Flyback SMPS

Simulation and Analysis of Electromagnetic Properties at the Secondary Port of Electronic Current Transformers Under Very Fast Transient Overvoltage

ANALYSIS ON THE EMI EFFECT OF STRAY MAGNETIC FIELD FROM MAIN CIRCUIT OF A PFC SWITCHED MODE POWER SUPPLY

Modeling and Application of Conducted EMI in Switch Mode Power Supply

Evaluation Method of Flyback Converter Behaviors on Common-Mode Noise

Investigation and Mitigation of Radiated EMI due to Near-field Coupling in a High-density Active-clamp Flyback Power Adapter

Determining Far-Field EMI From Near-Field Coupling of a Power Converter

Switching Noise Analysis for Conducted Electromagnetic Interference from of Power Electronic Module

Conducted EMI Noise Analysis Model for PFC Converters Based on Modeling of EMI Receiver

Research on conducted EMI of an off-line PWM switched mode power supply

Conducted emission analysis and suppression design of a DC/DC semi-isolated power supply

An EM Imaging Method Based on Plane-Wave Spectrum and Transmission Line Model

Electromagnetic Radiation Mechanism Analysis and Field Strength Prediction of an Elementary Digital Inverter with Cables

Near Field Effect Analysis and Common Mode Conducted EMI Model of a Switched Mode Power Supply

Analysis on the Effectiveness of the 20-H Rule Using Numerical Simulation Technique