Abstract:Self-interference (SI) cancellation is one of the most important techniques for full duplex wireless communication. As an indispensable component, the active analog canceller (AC) needs to mitigate the analog SI to ensure it meets the analog-to-digital converter (ADC) sampling requirement. However, the active AC cancellation performance is often restricted by the nonideal electronic components, e.g., the tunable attenuator, the phase shifter and associated circuits, which introduce nonlinear distortions to the residual SI signal that enters the receive chain, as the transmit power increases. This paper presents a full duplex architecture with AC nonlinearity modeling and suppression by including an extra feedback loop right after the power amplifier and an AC nonlinear distortion modeling and cancellation process followed by SI channel estimation and digital SI cancellation. By analyzing the feedback signal feeding the AC and the residual signal after AC cancellation, the AC nonlinear distortion can be estimated and subsequently suppressed by subtracting its estimates from the received samples. The distortion-suppressed signal is then processed by the refined digital SI cancellation with channel estimation and mitigation to further improve the cancellation performance. Experiments are performed on 20-MHz Long Term Evolution-advanced signals to demonstrate the effectiveness of the proposed full duplex architecture with signal power ranging from -5 dBm to 23 dBm at the PA output while from -23 dBm to 5 dBm at the receiver front end.

Nonlinear Distortion of Acoustic Devices for Radio-Frequency Front-End Circuit and Its Suppression

Nonlinear Distortion of Acoustic Devices for Radio-Frequency Front-End and Its Suppression RF ��

Perturbation Analysis of Second-Order Nonlinearity and Its Effectiveness for Radiofrequency Bulk Acoustic Wave Devices

Nonlinear Distortion and Its Analysis on Radio Frequency Thin Film Bulk Acoustic Devices

Research in Nonlinearity of Surface Acoustic Wave Devices

Analysis of Rayleigh-Mode Spurious Response Using Finite Element Method/Spectrum Domain Analysis for Surface Acoustic Wave Resonator on Nonflat SiO<sub>2</sub>/Al/LiNbO<sub>3</sub> Structure

Nonlinear distortion suppression for active analog self-interference cancellers in full duplex wireless communication

Analysis Of Rayleigh-Mode Spurious Response Using Finite Element Method/Spectrum Domain Analysis For Surface Acoustic Wave Resonator On Nonflat Sio2/Al/Linbo3 Structure

Pre-distortion Compensation for Optical-Based Broadband LFM Signal Generation System

Nonlinear Behaviors of RF SAW/BAW Devices

A Circuit Model for Nonlinear Simulation of Radio-Frequency Filters Employing Bulk Acoustic Wave Resonators

Recent Studies on Nonlinearity in SAW Devices

Design of Balanced RF Filter for Wireless Applications Using FBAR Technology

An Architecture for Capturing the Nonlinear Distortion of Analog Self-Interference Cancellers in Full-Duplex Radios

A Microwave Front-End Nonlinearity Distortion Compensation Method for Digital RF Receivers

High-Relative-Bandwidth Multiband LNA Distortion Elimination With Neural Network

Considerations for Measurement Setup for Second-Order Nonlinearity in Radio-Frequency Bulk Acoustic Wave Duplexers

Suppression Of Transverse Mode Spurious In Saw Resonators On An Sio2/Al/Linbo3 Structure For Wideband Cdma Applications

Optimization of acoustic dispersion for high performance thin film BAW resonators

Behavioral Modeling of Direct-Conversion Receivers for Nonlinear Distortion Mitigation

Nonlinearity in RF Acoustic Wave Devices, Review