Abstract:The dimensional accuracy of engine cylinder bore at multiscale has a tremendous influence on engine performances including friction power loss, vibration, leak tightness between piston and cylinder, and wear resistance. Tremendous researches were devoted to predict the dimensional accuracies of the honed cylinder by means of analytical, experimental, and numerical simulation methods. The dimensional quality of the honed cylinder bore was usually determined by establishing the relationship between honing parameters and dimensional accuracies of the honed cylinder bore. However, most researches predicted dimensional accuracy at macroscale or surface texture at microscale, respectively. Few efforts were devoted to predict the dimensional quality of honed cylinder bore at both macroscale and microscale levels simultaneously. To explore a new understanding of the honing mechanism of the cylinder bore, a multiscale model is proposed to predict the dimensional accuracy and surface texture of cylinder bore generated from the honing process at the macroscale and microscale simultaneously. The model aims to integrate both microscale factors including honing stone abrasives distribution, abrasive wear process, previous cylinder surface topography, and macroscale factors including cylinder geometric features and honing head motion trajectory into a multiscale analytical analysis. A force matching method is adopted in the multiscale predictive model to determine the feed depth in the honing of the cylinder bore. Thus, the proposed multiscale analytical model possesses an excellent capacity to simultaneously predict the roundness and cylindricity of the honed cylinder bore, as well as the surface texture/roughness of the honed cylinder bore in terms of Abbott-Firestone curve. The simulated results also revealed that the material removal process is closely related to the initial shape deviations of the cylinder bore, which cannot be corrected, compensated, or eliminated by the subsequent honing process given the deviations are associated with wavelengths higher than 27 mm under the given honing condition.

Shape Accuracy Analysis and Control for Honing Hole of Automobile Cylinder

Controlling and Optimization of the Honing Trajectory

Honing Trajectory Reconstruction and Accuaacy Control for Automotive Engine Cylinder Bore

Research on Control Method for Machining Non-Cylinder Pin Hole of Piston

Analytically Predicating the Multi-Dimensional Accuracy of the Honed Engine Cylinder Bore

Methodology to Improve the Cylindricity of Engine Cylinder Bore by Honing

PREDICTING MULTI-SCALE DIMENSIONAL ACCURACY OF ENGINE CYLINDER BY HONING

Accurate Analysis of Harmonic Gear Clearance and Visual Simulation

Control Strategy of Crankshaft Tangential Point Tracing Grinding and Error Analysis

Accuracy Control of Ballig of Crankshaft Journals in Grinding Process Based on Cutting Depth Model

Geometrical Error Identification And Compensation For Grinding Machine By Crankshaft Roundness Measuring

Configuration Design and Accuracy Analysis of Special Grinding Machine for Thin-Walled Small Concave Surfaces

Influences of Control Error and Setting Error on Machining Accuracy of Internal Gearing Power Honing

Quality Evaluation of Effective Abrasive Grains Micro-Edge Honing Based on Trapezoidal Fuzzy Analytic Hierarchy Process and Set Pair Analysis

An Accurate Digital Grinding Method on Inner Surface of Thin-Walled Rotary Part

Error Modeling and Force Effects Analysis on Crankshaft Pin Diameter in Path Controlled Grinding

An analytical investigation on the workpiece roundness generation and its perfection strategies in centreless grinding

Analysis and Control on Perpendicularity Error of Automobile Engine Block

Predicting Microscale Cross-Hatched Surface Texture in Engine Cylinder Bore

Analysis of Problems Arising from Latitudinal and Longitudinal Grinding of a Camshaft

The Cam For Complicated Cylinder Edge Shapes