Abstract:In the emerging field of nanoscience, tubular structures have been attracting remarkable interest due to their well-defined geometry, high specific area, and exceptional physical and chemical properties. Among them, oriented ZnO tubular arrays are regarded as promising candidates for various applications such as optoelectronics, solar cells, sensors, field emission, piezoelectrics, and catalysis. Although template-directed and selective dissolution synthesizing strategies are commonly used to prepare ZnO nanotubes, repeatability and large scale preparation are still challenging. In this study, ZnO nanotube arrays were controllably prepared by tuning the hydrothermal parameters, without the use of any additives. The mechanism underlying the self-conversion of ZnO nanorods to nanotubes was comprehensively studied based on the surface energy theory. It has been proved that the metastable top surface of the ZnO nanorods dissolves preferentially to reach a stable state during the hydrothermal growth. The specific surface energy of different crystal faces of ZnO nanorods was calculated using molecular dynamics simulation. The top surface of the ZnO nanorod, the Zn-terminated [0001] face, demonstrated much higher surface free energy than did the lateral faces, which indicated that the self-dissolution of top face (002) is energetically favorable. The self-conversion behavior of ZnO nanorod arrays with different diameters was specifically investigated by adjusting the initial precursor concentration, density of the crystal seed layers, and growth time. The dissolution-crystallization equilibrium concentration, determined by crystal surface energy, was found to be a key factor for the formation of the tubular structure. Notably, the critical equilibrium conditions for the self-conversion of ZnO nanorods to nanotubes, including zinc ion concentration and pH, have been identified by studying parameters corresponding to the dissolution-crystallization equilibrium for the metastable top surface of the ZnO nanorods. The preparation of the ZnO nanotube arrays was successfully accelerated and simplified via two-step procedure: (1) preparation of ZnO nanorod arrays and (2) self-conversion of ZnO nanorods to nanotubes. The preparation method based on the self-conversion mechanism from rods to tubes for polar oxides is simpler and more easily controllable as compared to the reported methods involving variety of additives. Because of the advantages of adaptability to a wide range of substrates, excellent conducting properties, and filling ability, the prepared ZnO nanotube array films were used in encapsulating phase-change materials. The encapsulated phase-change material exhibited excellent heat storage/release properties and heat conductivities. This indicates the potential application of precision devices for temperature control.

Controlled Synthesis of Oriented Single-Crystal Zno Nanotube Arrays on Transparent Conductive Substrates

Conversion of large-scale oriented ZnO rod array into nanotube array under hydrothermal etching condition via one-step synthesis approach

Preparation of Large-Scale Highly Oriented Zno Noodle Arrays and Study on the Photoconductivity

Single-Crystalline ZnO Nanotube Arrays on Conductive Glass Substrates by Selective Disolution of Electrodeposited ZnO Nanorods

Carbon-Assisted Synthesis of Aligned Zno Nanowires

Arrays of ZnO Nanowires Fabricated by a Simple Chemical Solution Route

Hydrothermal Synthesis of Well-Aligned ZnO Nanorod Arrays on Silicon

Self-Conversion From Zno Nanorod Arrays To Tubular Structures And Their Applications In Nanoencapsulated Phase-Change Materials

Zno Nanorod Arrays with Tunable Size and Field Emission Properties on an Ito Substrate Achieved by an Electrodeposition Method

Controlled one-step fabrication of highly oriented ZnO nanoneedle/nanorods arrays at near room temperature.

Nanowire Arrays Electrodeposited from Liquid Crystalline Phases

ZnO Nanowire and $\hbox{ws}_{2}$ Nanotube Electronics

Synthesis of Monodispersed Zno Nanorod Array Films by Chemical Solution Deposition.

Fabrication of oriented ZnO nanorod arrays and their optical performances

Large-scale fabrication of tower-like, flower-like, and tube-like ZnO arrays by a simple chemical solution route

Fabrication and characterization of single-crystalline ZnTe nanowire arrays

Fabrication of Arrays of Zinc Oxide Nanorods and Nanotubes in Aqueous Solution under an External Voltage

Room-temperature fabrication of highly oriented ZnO nanoneedle arrays by anodization of zinc foil

High-quality ZnO nanowire arrays directly fabricated from photoresists.

Studies of Electrochemical Synthesis of Ultrathin ZnO Nanorod/Nanobelt Arrays on Zn Substrates in Alkaline Solutions of Amine−Alcohol Mixtures

A Simple Route to Controllable Growth of ZnOnanorod Arrays on Conducting Substrates