Abstract:Iron oxide particles with different morphologies were synthesized by hydrothermal treatment using ferric hydroxide gel as precursor,prepared by adding ammonia to sulfuric acid leaching solution of pyrite cinders.In addition,the effects of reaction temperature,n(Fe2+)/n(Fe3+),total iron concentration and seed crystals adding amount on the phase,shape and size of the prepared iron oxide in the neutral medium were investigated.The phase and shape of the synthesized iron oxide particles were characterized by X-ray diffraction(XRD),scanning electron microscope(SEM),transmission electron microscopy(TEM) and selected area electron diffraction(SAED).The results show that platelet-type α-Fe2O3 particles are prepared via hydrothermal route when the temperature is 230 ℃,n(Fe2+)/n(Fe3+) is 0.1,total iron concentration is 1.25 mol/L and seed crystal adding amount is 2 g.With the increase of temperature,when it is in the range of 140?260 ℃,the hydrothermal products transfer from α-FeOOH to α-Fe2O3 and their shapes change from sphere to round pie and then to platelet.With the increase of n(Fe2+)/n(Fe3+),in the range of 0?0.12,the hydrothermal products are transferred from α-Fe2O3 to α-Fe2O3 and Fe3O4,and the shapes of α-Fe2O3 particles gradually change to platelet from sphere.Furthermore,the particle size also increases with the increase of n(Fe2+)/n(Fe3+).The obtained iron oxide particles become heterogeneous when the total Fe concentration is 0.625 mol/L,while it becomes sphere when the total Fe concentration is 1.875 mol/L.The products are elliptical without adding any seed crystal,while it becomes heterogeneous when the crystal seed adding amount is 6 g.

Hydrothermal Synthesis of Fe2O3 with Different Nanostructures

Synthesis and phase formation mechanism of alpha-Fe2O3 powders by hydrothermal reaction method

Hydrothermal synthesis and characterization of monodisperse α-Fe2O3 nanocubes

Effects of KOH and Temperature on Hydrothermal Synthesis of Α-Feooh Nanowire

Hydrothermal synthesis of monodisperse α-Fe2O3 nanocubes

Hydrothermal Synthesis of Magnetic Fe3O4 Hexagonal and Single Crystal Nanorods

Preparation and Morphology Analysis of Nano-Sized Iron Oxide

Thermal Oxide Synthesis and Characterization of Fe3o4 Nanorods and Fe2o3 Nanowires

Hydrothermal Synthesis of Magnetic Fe_3O_4 Hexagonal and Single Crystal Nanorods

Hydrothermal Synthesis and Characterization of Uniform Α-Feooh Nanowires in High Yield

Hydrothermal Synthesis and Charaction of α-Fe2O3 Mesocrystals and Nanorings

Morphology Controllable Iron Oxide Synthesized from Pyrite Cinders by Hydrothermal Method

Preparation of Fe3O4 nanoparticles with adjustable morphology

The Synthesis of Monodispersed Α-Fe2o3 Nanoparticles Via a Hydrothermal Process

Hydrothermal Synthesis And Characterization Of Octahedral Fe3o4 Microcrystals

Hydrothermal synthesis and characterization of α-FeOOH and α-Fe2O3 uniform nanocrystallines

Micro- and nano-structures of iron oxide with tunable morphologies fabricated via solvothermal process

Tuning Nanostructures of Hematite for Visible-Light Photocatalysis

Selective Synthesis Of Alpha-Feooh And Alpha-Fe2o3 Nanorods Via A Temperature Controlled Process

Study on Preparation of Nano-Fe2O3 by Thermal-Crystallization Method

Low‐Temperature Synthesis of NiFe2O4by a Hydrothermal Method