Abstract:In micro-electrochemical machining (μECM), material dissolution takes place at very close vicinity of tool electrode due to localization of electric field. Controlling the gap between tool electrode and workpiece is the key to μECM. Therefore, a new method is proposed to solve a variety of problems in small gap control. In the present context, experiments were carried out with an indigenously developed setup to fabricate cylindrical arrays. During the machining process, the flat electrode bends due to electrostatic force in pulse on-time, which self-adaptively narrows the gap between the electrode and the workpiece. The workpiece material will be removed once the gap meets the processing condition. Therefore, this method has advantages of reducing dependence on high precision machine tools and of avoiding complex servo control. The flat electrode quickly restores to its original condition when it is in pulse off-time, making the gap much larger than that in traditional electrochemical machining (ECM). The large gap benefits debris removing, which improves the machining accuracy. The influence of different experimental parameters on accuracy and efficiency during the machining process has been investigated. It is observed that with the increase in applied voltage or concentration of electrolyte, the material removal rate and the process gap both increase. The detailed analysis of the experimental results is described in this paper.

Method of Microelectrode with Electrochemical Machining and Its Applications

Electrochemical Machining Method Of Microelectrode And Comparisons With Microelectrode Made By Electrical Discharge Machining

Fabricating Microelectrode By Electrochemical Micromachining - Art. No. 06411p

Pulsed Micro-Electrochemical Machining Technology

Fabrication of Cylindrical Tungsten Microelectrode by Electrical Machining

Study On Micro Electrochemical Machining At Micro To Meso-Scale

Micro Electrochemical Machining And Its Influencing Factors

Research on Electrochemical Micromachining System and Related Techniques

Electrochemical Micromachining Based on Multifunction Machine Tool

Research On Micro Electrode Fabrication Based On Ecm

Fabricating Microelectrode With Nano Radius Tip By Electrochemical Micromachining

A study on wire electrochemical micromachining for fabrication of microgrooves

Design and Its Experiments of Micro Electrochemical Machining System

Research on Micro Electrochemical Machining Based on Multifunction Machine Tool

Fabrication of Micro Structures by Ultra Short Voltage Pulse Electrochemical Machining

Research On Micro Ecm Using Micro Array Electrode

Fabrication of Microelectrode by Current Density Control in Electrochemical Micromachining

The Overview and Prospect of the Micro Electrochemical Machining Technology

Experimental Research of ECM Using Ultra Short Pulses

Electrolytic micromachintng with high frequency short pulse current

Electrostatic Actuating Bendable Flat Electrode for Micro Electrochemical Machining