Abstract:Influence of texture type on mechanical properties and the evolution of microstructure and texture is thoroughly investigated via uniaxial tension experiment along rolling direction (RD) at room temperature on two different AZ31 alloy sheets. Electron backscattered diffraction (EBSD) measurements on deformed samples confirm that dislocation slip is the main deformation mechanism in as-received sheet with a typical basal texture, while dislocation slip and extension twinning (ET) both contribute to sustaining plastic strain in the sheet with a rare RD-split bimodal texture, which is fabricated by equal channel angular rolling and continuous bending process with subsequent annealing (ECAR-CB-A). Therefore, these two sheets demonstrate obviously different texture evolution during plastic deformation. As-received sheet maintains basal texture and further experience the concentration of basal poles towards normal direction (ND). However, ECAR-CB-A sheet not only undergoes the gradual diffusion and rotation of tilted basal poles to ND but also the development of a new TD-component texture. The activation of ET variants in ECAR-CB-A sheet is confirmed to play an important role in texture evolution, and the number of activated ET variants is increasing with the increase of angle between ND and c-axis. In addition, acquired mechanics data demonstrate that ECAR-CB-A sheet possesses higher fracture elongation (24%) and lower yield stress (73 MPa) as compared to as-received sample. This issue can be ascribed to the participation of ET to coordinate plastic deformation along c-axis and the easier activation of basal slip in ECAR-CB-A sheet.

Evolution Rule of Aluminum Alloy Textures under Plane Stress State

Mechanical Behavior and Texture Evolution of Aluminum Alloys Subjected to Strain Path Changes: Experiments and Modeling

Texture Evolution of Al-Mg-Li Aeronautical Alloys in In-Situ Tension

TEXTURE EVOLUTION OF POLYCRYSTALLINE ALUMINUM DURING ROLLING DEFORMATION I.Experimental Study

Microstructure and Texture Evolutions of Aa1050 Aluminum Alloy Cold Rolled to High Strains

Microstructure and Texture Evolution of 2024 Aluminum Alloy Sheet under Different Loading Conditions

Evolution of texture and microstructure of 2E12 aluminum alloy during cold rolling and annealing

On the Role of Texture in Governing Fatigue Crack Propagation Behavior of 2524 Aluminum Alloy

Evolution of Micro-Textures Within Individual Grains in Rolled Polycrystal Aluminum

Effect of Evolution of Polycrystalline Textures on R-Value of Lf2 Aluminum Alloy

Texture Evolution Of 01570 Aluminum Alloy Sheet

B13-O-06Evolution of Texture in 6016 Aluminum Alloy During Processing

Microstructure and Texture Evolution of Particle-Containing Aa3104 Alloy Cold Rolled to Large Strains

Evolution of Microstructures and Textures of High Purity Aluminium During Rolling and Annealing

Texture Evolution of Al-Zn-Mg-Cu Aluminum Alloy Plate During Cold Rolling

A Review of Texture Evolution Mechanisms During Deformation by Rolling in Aluminum Alloys

Study of Texture in 6016 Aluminum Alloy During Processing

Texture Evolution in an Al-Cu-Mg Alloy During Hot Rolling

Effect of texture types on microstructure evolution and mechanical properties of AZ31 magnesium alloy undergoing uniaxial tension deformation at room temperature

Texture Evolution of Polycrystalline Aluminum During Rolling Deformation Ii. Theoretical Simulation

On the Relationship between Thermomechanical Processing Parameters and Recrystallization Texture in AA1100 Aluminum Alloy