Abstract:Biomass gasification in a bubbling fluidized bed (BFB) reactor is numerically studied based on a particle-scale computational fluid dynamics-discrete element method (CFD-DEM), with thermochemical and polydispersity effects featuring. After model validation, the particle-scale information (e.g., particle motions, particle mixing, solid dispersion, and heat transfer contribution) are thoroughly explored with the discussion of the effects of several critical operating parameters on particle behaviours. The results show that the middle dense region has the highest biomass pyrolysis reaction rate due to the vigorous particle motion. Sand and biomass particles show synchronous horizontal motions, and the solid vertical dispersion coefficients are much higher than the solid horizontal ones, denoting that the vertically introduced gas flow dominates bed hydrodynamics. A higher operating temperature causes a higher solid dispersion coefficient. Elevating temperature and steam to biomass ratio (S/B) first increases and then decreases the particle mixing index. Convection plays a dominant role during the biomass gasification process, followed by the radiation and heat of reaction. The conduction accounts for the smallest proportion and can be neglected. Increasing operating temperature promotes chemical reactions, biomass temperature, and all heat transfer modes. Increasing S/B promotes biomass motions and gasification reactions, leading to more heat consumed and biomass temperature decrease. Decreasing biomass temperature results in a larger temperature difference between biomass particles and bed material, which enhances the conduction, convection, and radiation.

Research on Minimum Fluidization Velocity of Mixture of Pelletized Biomass and Sands

Effect of Agitation on the Fluidization Behavior of a Gas–solid Fluidized Bed with a Frame Impeller

Minimum fluidization velocity of bimodal polyethylene particles

CFD-DEM Investigation of the Fluidization of Binary Mixtures Containing Rod-Like Particles and Spherical Particles in a Fluidized Bed

Experimental Investigation of Bubble and Particle Motion Behaviors in A Gas-Solid Fluidized Bed with Side Wall Liquid Spray

Particle Agglomeration and Control of Gas-Solid Fluidized Bed Reactor with Liquid Bridge and Solid Bridge Coupling Actions

Research on Separation Mechanism of Liquid-Solid Fluidized Bed Separator

Measurement of the Fluidized Velocity in Gas-Solid Fluidized Beds Based on AE Signal Analysis by Wavelet Packet Transform

Bubble Dynamics and Particle Orientation in a Binary Fluidized Bed Containing Spherocylinders and Spheres

Prediction of minimum fluidization velocity in pulsed gas–solid fluidized bed

Experimental Study of the Effect of Fluidization Velocity on the Segregation of Two Size Particles System

A Numerical Study on Gas-Fluidized Beds of Wet Flexible Fibers

Numerical Study of Particle Injection into a Gas-Solid Fluidized Bed

Effects of Interparticle Forces on Fluidization Characteristics in Liquid-Containing and High-Temperature Fluidized Beds

Research on particle mixing in a fluidized bed

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

Modeling of the Minimum Fluidization Velocity and the Incipient Fluidization Pressure Drop in a Conical Fluidized Bed with Negative Pressure

Experiment research on utilization of particle biomass fuel in sintering process

Effect of immersed tubes configurations on mixing and heat transfer of mixed biomass and silica sand in a bubbling fluidized bed using CFD-DEM and statistical experimental design analysis

Flow Characterization of Gas-Solid Mixture in Fluidized Bed Combustion

Particle Behaviours of Biomass Gasification in a Bubbling Fluidized Bed