Abstract:Biomass fast pyrolysis fluidized bed reactor is regarded as one of the most promising technologies for high value utilization of biomass. In this work, one two-dimensional fluidized bed reactor model was established, coupling with multiphase CFD simulation method and pyrolysis reaction kinetics, and further verified by the experimental data. This work mainly investigated the effects of biomass inlet and nitrogen inlet modes on multi-process characteristics, such as flow behavior, heat transfer and pyrolysis reaction. The synergistic effects between the two inlet modes were further explored and thus would affect the three-phase pyrolysis product distribution. The results showed that the spatial particle distribution and temperature distribution in the dense phase zone were becoming more uniform and the tar yield increased when the biomass inlet mode changed from single nozzle to double nozzles jetting opposite. Besides, when the nitrogen nozzle number was set as one and the auxiliary gas velocity was set as 0.15 m/s, much larger local circulation formed in the dense phase zone, meanwhile the particle volume fraction and temperature became more evenly distributed, which was conducive to the biomass pyrolysis process. The nitrogen inlet mode was found to show a greater impact on the tar yield compared to the biomass inlet mode. For single gas inlet mode, one biomass nozzle should be preferred for lower auxiliary gas velocity and the opposite double nozzle would be better for higher auxiliary gas velocity. The synergistic effects between biomass and nitrogen inlet modes were further summarized, which were found to have a positive impact on the biomass pyrolysis reaction characteristics. Based on the above conclusions, this work could provide a feasible theoretical guidance for designing fluidized bed pyrolysis reactor and optimizing the biomass pyrolysis process.

Effect of immersed tubes configurations on mixing and heat transfer of mixed biomass and silica sand in a bubbling fluidized bed using CFD-DEM and statistical experimental design analysis

CFD-DEM Investigation of the Fluidization of Binary Mixtures Containing Rod-Like Particles and Spherical Particles in a Fluidized Bed

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

Particle Behaviours of Biomass Gasification in a Bubbling Fluidized Bed

Investigation of Gas-Solid Flow Dynamics and Heat Transfer in Fluidized Beds by Using DEM-LES Coupling Approach

Impact of the Reactor Structure on Biomass Pyrolysis in Fluidized-Bed Reactors: A Coarse-Grained CFD-DEM Study

Multi-Scale Simulation of Biomass Gasification in Fluidized Beds

Bubble Dynamics and Particle Orientation in a Binary Fluidized Bed Containing Spherocylinders and Spheres

CFD-DEM Simulation of Fluidized Bed with an Immersed Tube Using a Coarse-Grain Model

Computational Fluid Dynamics-Discrete Element Method Investigation of Solid Mixing Characteristics in an Internally Circulating Fluidized Bed

Optimization of multiple-chamber fluidized beds using coarse-grained CFD-DEM simulations: Regulation of solids back-mixing

Effects of tube configurations on the heat transfer and hydrodynamic behavior in a gas-solid fluidized bed

Improving biomass mixture separation efficiency in multiple inclined channels of gas–solid fluidized bed: CFD-DEM simulation and orthogonal experiment

A Numerical Study on Gas-Fluidized Beds of Wet Flexible Fibers

Numerical Simulation and Multi-Process Coupling Analysis for Biomass Pyrolysis Fluidized Bed Reactor Based on Synergistic Effects Between Biomass and Nitrogen Inlet Modes

Particle-Scale Simulation of Solid Mixing Characteristics of Binary Particles in a Bubbling Fluidized Bed

Numerical investigation of the particle flow behaviors in a fluidized-bed drum by CFD-DEM

CFD–DEM Study of Mixing and Dispersion Behaviors of Solid Phase in a Bubbling Fluidized Bed

CFD-DEM Modeling of Rod-Like Particles in a Fluidized Bed with Complex Geometry

Study on a Semi-Resolved CFD-DEM Method for Rod-Like Particles in a Gas-Solid Fluidized Bed

Numerical Investigation of the Effect of the Location of an Immersed Tube in a Fluidized Bed on Heat Transfer of Surface-to-bed