Abstract:We report a novel modified semi-carbonized fiber (CF) prepared using cotton and acrylic clothes for derisking contaminated water to realize the resource utilization of discarded clothes in wastewater treatment. In this study, amphoteric and auxiliary modifiers were used to modify CFs for preparing amphoteric and amphoteric-auxiliary CFs. The basic physicochemical properties of different modified CFs were determined, and the microscopic morphology of modified CFs was detected. The isothermal adsorption characteristics of Cu(II) and Pb(II) on different modified CFs were investigated by the batch method, and the effect mechanisms of temperature, pH, ionic strength , and material dose were compared. Physicochemical properties and microscopic morphology results proved that amphoteric and auxiliary modifiers were modified on the CF surface and changed the surface properties of CF. The adsorption capacities of Cu(II) and Pb(II) on modified CFs increased with the increase in equilibrium concentration of Cu(II) and Pb(II), and the isotherm was more suitable for Freundlich model fitting than that of the Langmuir model. The maximum adsorption capacities ( q m ) of Cu(II) and Pb(II) on different modified CFs were 60.72–81.26 mg/g and 102.58–161.72 mg/g, respectively, and presented the trend of amphoteric-auxiliary CFs > amphoteric CFs > CFs. Increasing pH and temperature and decreasing ionic strength and material dose were beneficial to Cu(II) and Pb(II) adsorption. The Cu(II) and Pb(II) adsorption process was a spontaneous, endothermic, and entropy-increasing reaction, and the adsorption rate was controlled by chemisorption . The adsorption amount of amphoteric-auxiliary CFs maintained about 65% of original materials after 3 times of regeneration. Electrostatic attraction, precipitation, complexation, and ion exchange were the main adsorption mechanisms. The cation exchange capacity and total pore volume of modified CFs were key to determining q m of Cu(II) and Pb(II).

Preparation of Urea-based Fiber and Adsorption of Cu~(2+) and Cd~(2+) in Water

Preparation of Cotton-Based Fibrous Adsorbents for the Removal of Heavy Metal Ions.

Preparation and Characterization of Cellulose-Based Adsorbent and Its Application in Heavy Metal Ions Removal.

Carboxyl and Polyamine Groups Functionalized Polyacrylonitrile Fibers for Efficient Recovery of Copper Ions from Solution

ADSORPTION BEHAVIORS AND MECHANISMS OF S930 CHELATING RESIN TOWARD Cu(Ⅱ),Pb(Ⅱ) AND Cd(Ⅱ) FROM AQUEOUS MEDIA

Adsorption Performances for Aqueous Cu(II) onto Chelating Resin Dowex M-4195: Interaction Mechanism Investigation

Adsorption of divalent heavy metal ions onto IDA-chelating resins: simulation of physicochemical structures and elucidation of interaction mechanisms.

Visible sequestration of Cu2+ ions using amino-functionalized cotton fiber

Visible sequestration of Cu<sup>2+</sup>ions using amino-functionalized cotton fiber

Support Platform of Functionalized Sustainable Cellulose Self-Entanglement Monolithic Adsorbents for Efficient Adsorption of Cadmium(II) Ions.

Experimental and DFT Studies on the Adsorption of Cd(II) Ions from Aqueous Solutions by Nanofiber Modified Thiourea Groups

Experimental and Modelling Studies on Fixed Bed Adsorption for Cu(II) Removal from Aqueous Solution by Carboxyl Modified Jute Fiber

Preparation of nylon based magnetic adsorption materials and their adsorption properties for heavy metal ions

ADSORPTION OF Cu(Ⅱ) ON DYE-PRELOADED RESIN

Adsorption Removal of Copper and Nickel Ions from Wastewater by Ammonia Modified Cotton Stalks

Preparation and Adsorption Performance of a Cellulosic‐adsorbent Resin for Copper(ii)

Novel modified semi-carbonized fiber prepared using discarded clothes for derisking Cu(II) and Pb(II) contaminated water

Preparation of New Chelating Fiber with Waste PET As Adsorbent for Fast Removal of Cu2+ and Ni2+ from Water: Kinetic and Equilibrium Adsorption Studies

Study on Preparation of Activated Carbons Derived from Sewage Sludge with FeCl_3-Application to Cu~(2+) Adsorption

Synthesis of amino-functionalized silicon fiber cloth composite for effective removal of Cu (II) from wastewater

Preparation and performance of polyacrylonitrile fiber functionalized with iminodiacetic acid under microwave irradiation for adsorption of Cu(II) and Hg(II)