Abstract:Over the past several decades, trace heavy metal ion pollution, such as Cd(II), Cu(II), Pd(IV), etc., have attracted much attention because of their virulent and hard degradation properties. Recently, great efforts have been devoted to establish new methods and technologies to removal toxic metals. Among them, activated carbon adsorption, especially the modified activated carbon technology has been extensively studied due to its feasibility, such as, the low-cost of activated carbon, the recovery of the activated carbon. In this study, Cd(II) was chosen as the target heavy metal ion to evaluate the activity of modified powdered activated carbon(PAC) and commercial available tannic acid(TA), a kind of Chinese gallotannin with molecular weight 1701, was employed in the modification of the surface properties of PAC. Optimum experimental parameters such as pH, contact time, initial concentration of TA and adsorption capacity for tannic acid immobilisation onto PAC and Cd(II) adsorption on tannic acid-powdered activated carbon combination were determined , respectively. Adsorption of Cd(II) on PAC alone was also determined to compare the experimental results. The adsorption capacity for tannic acid immobilisation onto PAC was analysed by the solution absorbance variation of maximal ultraviolet absorption peak at 276 nm, and the concentration of Cd(II) in the solution was measured through AAS and ICP-AES. Specific surface area, pHpzc and surface functional groups of PAC and TA-PAC combination were determined by BET, powder addition method and Boehm titration method, respectively, to study on the adsorption mechanism of Cd(II) on modified surface. Results showed that TA was effective to enhance the metal adsorption capacity of PAC surfaces and the modified PAC got the maximal Cd(II) adsorption capacity with 25 gram tannic acid immobilised per gram PAC at the optimum immobilization pH value 3.5, at room temperature 18°C . The polyphenol structure of TA immobilised o- - n PAC surfaces may contribute to the changes of adsorption capacity. Neither of the Langmuir isotherm equation and Freundlich isotherm equation was found to provide reasonable well fit for the TA-PAC and Cd(II)-TA-PAC combinations.

Experimental and DFT Studies on the Adsorption of Cd(II) Ions from Aqueous Solutions by Nanofiber Modified Thiourea Groups

Preparation of Cotton-Based Fibrous Adsorbents for the Removal of Heavy Metal Ions.

The adsorption property investigation of tetraethylenepentamine functionalized nano-Fe3O4 polymer adsorbents on Cu(II) from wastewater

Fast and Effective Removal of Cadmium Ion from Water Using Chitosan Encapsulated Magnetic Fe 3 O 4 Nanoparticles

Adsorption of divalent heavy metal ions onto IDA-chelating resins: simulation of physicochemical structures and elucidation of interaction mechanisms.

High Efficient Removal of Cu(II) by a Chelating Resin from Strong Acidic Solutions: Complex Formation and DFT Certification

Adsorption Performances and Mechanisms of the Newly Synthesized N,N '-Di (carboxymethyl) Dithiocarbamate Chelating Resin Toward Divalent Heavy Metal Ions from Aqueous Media

Synthesis and Characterization of Dithiocarbamate Carbon Nanotubes for the Removal of Heavy Metal Ions from Aqueous Solutions

Crosslinked Electro-Spun Chitosan Nanofiber Mats with Cd(II) As Template Ions for Adsorption Applications

Characteristics of Equilibrium, Kinetics Studies for Adsorption of Hg(II), Cu(II), and Ni(II) Ions by Thiourea-Modified Magnetic Chitosan Microspheres.

The Enhancement of Cd(II) Adsorption by Immobilsation of Tannic Acid onto Powdered Activated Carbon

Removal of Cd(II) from Aqueous Solution by Electrospun Nylon 6 Nanofibrous Nonwoven Containing Attapulgite

Studies on the Adsorption of Cadmium Ions by Micro-Size Carbon Fibers in Aqueous Solution

Removal of Pb2+ and Cd2+ from Aqueous Solution Using Thiol-Functionalized Multi-Walled Carbon Nanotubes As Adsorbents

Ultrafast Removal of Cadmium(II) by Green Cyclodextrin Metal-Organic-Framework-Based Nanoporous Carbon: Adsorption Mechanism and Application.

Cadmium ion sorption from aqueous solutions by high surface area ethylenediaminetetraacetic acid- and diethylene triamine pentaacetic acid-treated carbon nanotubes

Adsorption of Cu(II) on β-cyclodextrin modified multiwall carbon nanotube/iron oxides in the absence/presence of fulvic acid

Investigation of cadmium adsorption factors from water by synthesis of chitosan/polyvinyl alcohol/modified FDU‐12 nanocomposite

Novel environmental-friendly nano-composite magnetic attapulgite functionalized by chitosan and EDTA for cadmium (II) removal

ONE-POT SYNTHESIZED FE3O4/PMMA MAGNETIC NANOADSORBENTS FOR FAST CD(II) REMOVAL

Experimental and theoretical studies of sodium acetyldithiocarbamate for the removal of Cu2+ and Ni2+ from aqueous solution